期刊文献+

偏心电主轴动力学分析 被引量:7

Dynamic analysis of high speed motorized spindles with eccentrics
原文传递
导出
摘要 为了揭示偏心状态下高速电主轴的动力学行为,从高速电主轴的结构特征出发,应用有限元法对其进行动力学分析,建立了高速电主轴动力学分析模型;基于电磁学和机械系统动力学基本理论,建立了各种偏心状态下高速电主轴的广义不平衡力表达式,根据所建动力学模型可以获得高速电主轴在不同预加载荷、轴承配置下的固有频率和不平衡响应等动态特性。将120MD60Y6型电主轴的机电结构参数代入模型,并利用Matlab/Simulink软件进行仿真分析,计算所得的数据与实验所测数据相符,从而证明所建模型是正确的。 In order to study dynamic behaviors of high speed motorized spindles under different eccentric conditions,the dynamics of high speed motorized spindles is analyzed by using finite element method on the basis of its structure,and an analytical dynamic model of high speed motorized spindles is established.Based on electromagnetism and mechanical system dynamics,expressions of general unbalanced force of high speed motorized spindles are established.Thus,dynamic characteristics of spindles,such as natural frequencies and unbalance response,can be obtained from the proposed model while spindles have different preloads and bearing configurations.The parameters of a 120MD60Y6 motorized spindle are substituted into the model and a simulation is carried out by Matlab/Simulink.The result shows good agreement with the data obtained from experimental modal analysis,which proves that the proposed model is correct.
出处 《重庆大学学报(自然科学版)》 EI CAS CSCD 北大核心 2012年第3期26-32,共7页 Journal of Chongqing University
基金 国家自然科学基金资助项目(50675233 51005259) 重庆市重大科技攻关资助项目(2006AA3010)
关键词 电主轴 偏心 有限元法 动力学分析 固有频率 不平衡响应 high speed motorized spindle eccentricity finite element method dynamic analysis natural frequency unbalance response
  • 相关文献

参考文献16

  • 1LIN C W,TU J F.Model-based design of motorizedspindle systems to improve dynamic performance athigh speeds[J].Journal of Manufacturing Processes,2007,9(2):94-108.
  • 2VAFAEI S,RAHNEJAT H,AINI R.Vibrationmonitoring of high speed spindles using spectralanalysis techniques[J].International Journal ofMachine Tools&Manufacture,2002,42(11):1223-1234.
  • 3CHANG C F,CHEN J J.Vibration monitoring ofmotorized spindles using spectral analysis techniques[J].Mechatronics,2009,19(5):726-734.
  • 4LYNAGH N,RAHNEJAT H,EBRAHIMI M,et al.Bearing induced vibration in precision high speedrouting spindles[J].International Journal of MachineTools&Manufacture,2000,40(4):561-577.
  • 5GAGNOL V,BOUZGARROU B C,RAY P,et al.Model-based chatter stability prediction for high-speedspindles[J].International Journal of Machine Tools&Manufacture,2007,47(7-8):1176-1186.
  • 6CHANG C F,CHEN J J.Thermal growth controltechniques for motorized spindles[J].Mechatronics,2009,19(8):1313-1320.
  • 7JIANG S Y,MAO H B.Investigation of variableoptimum preload for a machine tool spindle[J].International Journal of Machine Tools&Manufacture,2010,50(1):19-28.
  • 8XU M,JIANG S Y,CAI Y.An improved thermalmodel for machine tool bearings[J].InternationalJournal of Machine Tools&Manufacture,2007,47(1):53-62.
  • 9肖曙红,郭军,张伯霖.高速电主轴热结构耦合特性的有限元分析[J].机械设计与制造,2008(9):96-98. 被引量:15
  • 10孟杰,陈小安,合烨.高速电主轴电动机—主轴系统的机电耦合动力学建模[J].机械工程学报,2007,43(12):160-165. 被引量:31

二级参考文献41

共引文献113

同被引文献97

引证文献7

二级引证文献51

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部