期刊文献+

空调联箱多支管的顺序液压成形方法

The Ordinal Hydro-forming Method for Air Hundling Unit
下载PDF
导出
摘要 以空调联箱多支管件为研究目标,探索适合生产多个支管的顺序液压成形方法。运用有限元方法对变形过程进行模拟,通过分析不同成形方案支管的高度和壁厚的分布情况,由此得出最佳的工艺方案。结果表明:运用顺序液压成形方法生产空调联箱多支管是可行的,支管的高度和数目都能达到要求。 Taking the multi-way tube on air hundling unit as research object,the suitable ordinal hydro-forming method to produce the multi-way tubes was found out.Utilizing the finite element method to simulate the deformation process,through analyzing the distribution laws of branch height and the thickness of the different process schemes,the best one was revealed.Results show that the ordinal hydro-forming method for air hundling unit is feasible,and the requirements for tubes height and quantity can be met.
出处 《机床与液压》 北大核心 2012年第7期8-10,共3页 Machine Tool & Hydraulics
基金 国家自然科学基金资助项目(U0934006)
关键词 顺序液压成形 多支管 数值模拟 空调联箱 Ordinal hydro-forming Multi-way tube Numerical simulation Air hundling unit
  • 相关文献

参考文献7

二级参考文献35

  • 1郎利辉,苑世剑,王仲仁,王小松,付庄.防锈铝变径管内高压成形过程数值模拟[J].中国有色金属学报,2001,11(z2):211-216. 被引量:14
  • 2李洪洋,苑世剑,王小松,苗启斌,王仲仁.内高压成形三台阶轴过程中内压值影响的有限元分析[J].塑性工程学报,2005,12(2):38-41. 被引量:5
  • 3李洪洋,苑世剑,王小松,苗启斌,王仲仁.轴向补料量对内高压成形三台阶轴影响的实验研究[J].清华大学学报(自然科学版),2005,45(5):597-600. 被引量:5
  • 4高振莉,窦蕴平,郭会光.圆管液压成形设备中轴向密封力与内压力的控制[J].锻压技术,2006,31(4):79-81. 被引量:4
  • 5Lei L P, Kim J, Kang B S. Analysis and design of hydroforming process for automobile rear axle housing by FEM [J]. Int. J. Machine Tools Manuf, 2000, 40: 1691- 1708.
  • 6Hartl C. Research and advances in fundamentals and industrial applications of hydroforming [ J ]. Journal of Materials Processing Technology, 2005, 167:383 -392.
  • 7赵海欧.LS_DYNA动力分析指南[M].兵器工业出版社,2003.
  • 8T. Sokolowski, K. Gerke, M. Ahmetoglu, T. Altan. Evaluation of Materical Characteristics in Tube Hydroforming: Hydraulic Bulge Testing of Tubes [ J ]. Journal of Materials Processing Technology, 2000, 98 : 34 - 40.
  • 9Altan, M. Koc, Y. Aue-u-lan, K. Tibari. Formability and Design Issues in Tube Hydroforming [C]. Internationl Conference on Hydroforming. 1999, Fellbach-Stuttgart, Germany.
  • 10F. Dohamnn, A. Bohm, K. -U. Dudziak. The shaping of hollow shaped workpieces by liquid bulge forming [C]. Advanced technology of plasticity 1993-Procceding of the fourth international conference on technology of plasticity, 1993, 6:447-452.

共引文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部