期刊文献+

合成乙酸异龙脑酯催化剂的研究 被引量:3

Study on the catalyst for the synthesis of isobornyl acetate
下载PDF
导出
摘要 研究分子筛催化剂HYI在合成乙酸异龙脑酯反应中的性能,考察焙烧温度、反应温度及颗粒度对催化剂反应性能的影响,在优化反应条件下考察催化剂稳定性。结果表明,在焙烧温度500℃制备的催化剂具有较高的活性、选择性和稳定性,催化剂直径小于2 mm条件下,可以消除内扩散对催化剂的影响。在反应温度75℃、常压和莰烯空速0.6 h-1条件下,莰烯转化率74%,乙酸异龙脑酯选择性94%,成型催化剂在固定床反应器上连续稳定反应2 500 h以上。利用N2吸附-脱附、NH3-TPD和TG-DSC对HYI催化剂进行表征,分析催化剂的失活原因,结果表明,催化剂失活主要与反应过程中积炭导致的比表面积和孔容下降有关,催化剂活性可以通过烧焦再生恢复,具有良好的工业应用前景。 The catalytic performance of the zeolite catalyst HYI for the esterification of camphene and acetic acid to isobornyl acetate and the effects of calcination temperature, reaction temperature and grain size on the performance of the catalyst were studied. The catalyst stability was investigated in a fix-bed reactor under the optimum reaction condition. The results indicated that HYI catalyst prepared at caleinic- ition temperature 500 ℃ exhibited high esterification activity, selectivity and stability; the conversion of camphene and the selectivity to isobornyl acetate were 74% and 94% respectively under the condition of reaction temperature 80 ℃ and camphene space velocity 0.6 h^-l. When the particle diameter of the catalyst was smaller than 2 mm, the effect of intraparticle diffusion could be ignored. The catalyst could continiously and stably run for over 2 500 h in the fix-bed reactor. The fresh and deactivated HYI catalysts were characterized by NH3-TPD, N2 adsorption-desorption and TG-DSC in order to know the deactivation causes of the catalyst. The results showed that carbon deposition which reduced the specific surface area and pore volume was the main reason of the catalyst deactivation. HYI catalyst was regenerated by the carbon deposition and exhibited good commercial application prospects. burning
出处 《工业催化》 CAS 2012年第3期71-75,共5页 Industrial Catalysis
关键词 催化化学 乙酸异龙脑酯 莰烯 酯化 失活 再生 catalytic chemistry isobornyl acetate camphene esterification deactivation regeneration
  • 相关文献

参考文献8

二级参考文献6

共引文献18

同被引文献18

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部