期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

30Mn27Al4V无磁钢的热变形规律 被引量：3

Research on hot deformation behavior of 30Mn27Al4V non-magnetic steel
下载PDF
导出
摘要 采用MMS-300热/力模拟实验机,研究30Mn27Al4V无磁钢在变形温度900℃～1150℃、应变速率0.1s-1～10s-1条件下的热变形规律。结果表明,在热变形过程中,当变形温度为1000℃～1150℃、应变速率为0.1s-1～10s-1条件下,实验用钢均发生明显的动态再结晶。确定变形激活能为503.7kJ/mol以及Z参数,得到了30Mn27Al4V无磁钢的高温流变应力本构方程。根据实验数据回归,建立了该钢的高温塑性变形抗力数学模型。 The hot deformation behavior of 30Mn27Al4V non-magnetic steel at the strain rates of 0.1s-1~10s-1 and deformation temperatures of 900℃~1150℃ was studied by MMS-300 thermomechanical simulator.The results show that full dynamic recrystallization occurs at the strain rates of 0.1s-1~10s-1 and deformation temperatures of 1000℃~1150℃.The activation energy of the steel is 503.7kJ/mol for hot deformation.The Zener-Hollomon parameter was obtained.The constitutive equation and mathematic model of deformation resistance were also established.
作者 马彪 韩文龙 李涛 李长生
机构地区 东北大学轧制技术及连轧自动化国家重点实验室
出处 《塑性工程学报》 CAS CSCD 北大核心 2012年第2期66-69,共4页 Journal of Plasticity Engineering
基金 国家自然科学基金资助项目(51174057 50534020)
关键词 无磁钢 热变形 变形抗力模型 本构方程 non-magnetic steel hot deformation deformation resistance model constitutive equation
分类号 TG142.1 [金属学及工艺—金属材料]
  • 相关文献

参考文献8

  • 1徐金璋.有发展前途的高锰无磁钢.上海金属,1984,54(3):44-49.
  • 2薛侃时 戎忠良 谭美霞等.超低温无磁钢CR_2的研究.上海金属：钢铁分册,1982,(1):47-52.
  • 3张彦生 苏丽娟.30Mn20Al3无磁钢及低温钢的研究[J].金属学报,1983,19:253-253.
  • 4方园,梁高飞.高锰板带钢及其制造技术[J].钢铁,2009,44(1):1-6. 被引量：4
  • 5Sellars C M,Tegart W J.Relationship betweenstrength and structure in deformation at elevated tem-peratures[J].Mem.Sci.Rev.Met,1966.63(9):731-745.
  • 6Jonas J J,Sellars C M,Tegart W J.Strength and struc-ture under hot working conditions[J].Int.Met.Rev,1969.130(14):11-24.
  • 7Liu J T,Chang H B,Wu R H,et al.Investigation onhot deformation behavior of AISI T1high-speed steel[J].Materials Characterization,2000.45:175-186.
  • 8Zener C,Hollomon J H.Effect of strain rate upon theplastic flow of steel[J].Journal of Applied Physics,1944.15(1):22-32.

二级参考文献21

  • 1米振莉,唐荻,严玲,郭锦.高强度高塑性TWIP钢的开发研究[J].钢铁,2005,40(1):58-60. 被引量：36
  • 2殷瑞钰,苏天森.中国薄板坯连铸连轧的发展特点和方向[J].钢铁,2007,42(1):1-7. 被引量：21
  • 3Frommeyer G,Briix U,Neumann P.Super-Ductile and HighStrength Manganese-TRIP/TWIP Steels for High EnergyAbsorption Purposes[J].ISU International,2003,43(3):438.
  • 4Frommeyer G,Drewes E J,Engl B.Physical and Mechanical Properties of Iron-Aluminium-(Mn,Si)Lightweight Steels[J].La Revue de MetaUurgie,2000,(10):1245.
  • 5Vercammen S,Blanpain B,Cooman B C De,et al.Cold Rolling Behavoour of an Austenitic Fe-30Mn-3AI-3Si TWIP Steel:the Importance of Deformation Twinning[J].Aeta Materialia,2004,52:2005.
  • 6YANG P,XIE Q,MENG L,et al.Dependence of Deformation Twinning on Grain Orientation in a High Manganese Steel[J].Scripta Materialia,2006,55(7):629.
  • 7HUANG B X,WANG X D,RONG Y H,et al.Mechanial Behavior and Martensitic Transformation of an Fe-Mn-Si-Al-Nb Alloy[J].Materials Science and Engineering A,2006,438-440:306.
  • 8Hamada A S,Karjalainen L P,Somani M C.The Influence of Aluminum on Hot Deformation Behavior and Tensile Properties of High-Mn TwIP Steel[J].Materials Science and Engineering A,2007,467:114.
  • 9Hamada A S,Kadalainen L P,Somani M C Constitutive Behavior of Two High-Mn-Al TWIP Steels at Hot Rolling Temperatures[J].Canadian Metallurgical Quarterly,2007,46(1):47.
  • 10Lieven Bracke,Jan Penning,Nuri Akdut.The Influence of Cr and N Additions on the Mechanical Properties of FeMnC Steels[J].Metallurgical and Materials Transactions,2007,28:520.

共引文献5

同被引文献26

  • 1赵先存,杨志勇,宋为顺,等.钢铁结构材料的功能化[M].北京:冶金工业出版社,2010.
  • 2Balytskyi O I. Corrosion-mechanical characteristics of the materials of nonmagnetic shrund rings of turbogenerators. I. 8Mn-8Ni-4Cr and 18Mn-4Cr steels [ J ]. Material Science, 1997,33(4) :539 -552.
  • 3Xu L, Wang C Y, Liu G Q, et al. Hot deformation behavior of medium carbon V-N microalloyed steel [ J ]. Transactions of Nonferrous Metals Society of China, 2009, 19:1389 - 1394.
  • 4Momeni A, Dehghani K, Keshmiri H, et al. Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel [ J ]. Materials Science and Engineering:A, 2010,527(6) :1605 - 1611.
  • 5Grol3eiber S, Ilie S, Poletti C, et al. Influence of strain rate on hot ductility of a V-microalloyed steel slab [J]. Steel Research,2012,83(5) :445 -455.
  • 6Sellars C M,Tegart W J. Relationship between strength and structure in deformation at elevated temperatures [ J ]. Mere Sci Rev Met, 1966,63 ( 9 ) :731 - 745.
  • 7Jonas J J,Sellars C M, Tegart W J. Strength and structure under hot working conditions [ J ]. Metallurgical Review, 1969,130(14) :11 -24.
  • 8Zener C, Hollomon J H. Effect of strain rate upon the plastic flow of steele J]. Journal of Applied Physics, 1944,15 ( 1 ) : 22 - 32.
  • 9Prasad Reddy G V,Sandhya R,Valsan M,et al.Strain Controlled Fatigue Deformation and Fracture of Nitrogen Alloyed 316LN Austenitic Stainless Steel[J].Transactions of the Indian Institute of Metals,2010,63(2-3):505-510.
  • 10Cho Hyunchul,Kim Gyoung Koo,Kim In Sup,et al.Low Cycle Fatigue Behaviors of Type 316LN Austenitic Stainless Steel in 310 ℃Deaerated Water-fatigue Life and Dislocation Structure Development[J].Materials Science and Engineering A,2008,480:96-100.

引证文献3

二级引证文献4

塑性工程学报
2012年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部