摘要
通过设计不同的辅助真空压力树脂注入工艺 ,发现在 RTM制造过程中 ,有效地利用真空技术 ,可使产品的断裂强力分别由 1 .464× 1 0 4 N增加到 1 .488× 1 0 4 N和 1 .50 3× 1 0 4 N,间隙截面比例分别由 2 .65%降低到1 .2 6%和 0 .1 46% .
Through the design of the different resin injection technology the author discovers that the usage of assisted vacuum degree during RTM injection process can increase fracture strength from 1.464×104 N to 1.488×104 N and 1.503×104 N,and decrease the voids ratio cross section from 2.65% to 1.26% and 0.146%.
出处
《天津纺织工学院学报》
北大核心
2000年第2期41-43,共3页
Journal of the Tianjin Institute of Textile Science and Technology
关键词
树脂转化模型
辅助真空压力
树脂注入
断裂强力
resin transfer molding (RTM)
assisted vacuum pump pressure
resin injection
fracture strength
voids ratio cross section