期刊文献+

刮板输送机链轮卡链工况下的动力学特性分析 被引量:19

Analysis on Sprocket Dynamics Features of Scraper Conveyer Under Performances of Chain Jammed
下载PDF
导出
摘要 建立了基于瞬态动力学分析软件MSC.Dytran的刮板输送机链轮传动系统等效动力学模型,分析了卡链过程中链轮与圆环链之间的接触动力学特性,得出链轮最大应变的变化规律:伴随着链轮与圆环链"冲击—反弹",最大应变在0.06 s内经历4次"小—大—小"周期性变化,且随着循环次数的增加,应变峰值逐渐降低,最后随着电机输出力矩的增加最大应变同步增加;选定链轮上5个特殊位置的节点,分析得出卡链过程中其应变、法向接触力、切向力、摩擦力的变化规律。 The equivalent dynamics model of the sprocket driving system in the scraper conveyor established based on MSC. Dytran was applied to analyze the contact dynamics features between sprocket and chain during the chain jammed process and the max strain variation law of the sprocket was obtained. With the "impact-rebound" between the sprocket and chains, the max strain would have four small-- large--small periodical variations within 0. 06 s. With the circulated number increased, the peak of the strain would be steadily reduced. Finally with the output torque of the electric motor increased, the maximum strain would be synchronously increased. With five special lo- cation nodes selected on the chain sprocket, the variation laws of the strain, normal contact force, tangential contact force and frictional force in the chain jammed process were analyzed and obtained.
出处 《煤炭科学技术》 CAS 北大核心 2012年第6期66-69,共4页 Coal Science and Technology
基金 "十一五"国家科技支撑计划重点资助项目(2007BAB13B01-02) 山西省科技重大专项资助项目(20111101040)
关键词 刮板输送机 链轮 卡链 动力学特性 scraper conveyer sprocket chain jammed dynamics features
  • 相关文献

参考文献8

二级参考文献32

共引文献75

同被引文献105

引证文献19

二级引证文献101

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部