期刊文献+

光纤布拉格光栅金属化保护中的应力 被引量:4

Stress in Metal Coating Fiber Bragg Grating
原文传递
导出
摘要 在用化学镀结合电镀方法对光纤布拉格光栅(FBG)进行金属化保护的过程中产生的应力直接影响到金属化FBG(MFBG)的传感精度。为此,基于应力产生的机制,对应力作用下化学镀和电镀过程中FBG的谐振谱变化进行了分析。实验发现化学镀后FBG谐振谱出现了较大的谱带展宽与峰值损耗减少。对化学镀产生的应力进行了理论及数值分析,结果显示热应力在FBG内部产生了扰动。通过延长化学镀后冷却时间的方法减少热应力,并通过充分搅拌化学镀液的方法减少应力的不均匀性,优化后的化学镀应力对FBG的影响很小。其后的电镀实验显示电镀过程是产生应力的主要原因。通过稳定较高的电镀温度、充分搅拌及采用双电极的方法达到了尽可能减少电镀过程应力对FBG频谱影响的目的。对优化化学镀和电镀条件后制成的MFBG进行温度传感实验表明,其回程误差小于已有的报道。 Stress produced in metallization of fiber Bragg grating (FBG) using electroless-electroplating method affects the sensing accuracy of FBG directly. Based on the mechanism of stresses, the changes of FBG's transmission spectrum in metallization are studied for better sensing accuracy. Experiments show that electroless plated FBG exhibits broadened spectrum and reduced peak value. Theory and simulation analyses are conducted to study the stress in electroless plating. Results show that the thermal stress causes perturbation in FBG. Prolonging the cooling time is used to reduce the thermal stress. And during the electroless plating, the solution is mixed timely to make the stress uniform. It is shown that stress in electroless plating with the optimal condition affects the FBG little. The following electroplating experiments show that most stress is produced in the electroplating process. The changes of FBG's spectrum are minimized by stabilizing higher electroplating temperature, mixing timely and using double electrodes. Finally, temperature sensor experiments for the metal coated FBG (MFBG) metalized under the optimized condition prove that the hysterisis error is reduced compared with the reported results.
出处 《激光与光电子学进展》 CSCD 北大核心 2012年第6期68-76,共9页 Laser & Optoelectronics Progress
基金 国家自然科学基金(61067003 60967002 50905082) 高等学校博士点新教师基金(20103601120005) 江西省自然科学基金(20114BAB205067)资助课题
关键词 光纤光学 金属化光纤布拉格光栅 化学镀结合电镀保护 应力 谐振谱变化 fiber optics metal coated fiber Bragg grating electroless and electroplating method stress change of resonance spectrum
  • 相关文献

参考文献7

二级参考文献53

共引文献254

同被引文献47

  • 1李小甫,姜德生,余海湖,余丁山,杨恩宇,李鸿辉.石英光纤表面化学镀镍磷合金工艺[J].化工学报,2005,56(1):126-129. 被引量:30
  • 2曹晔,刘波,刘丽辉,罗建花,赵健,高宏伟,张伟刚,开桂云,董孝义.对温度不敏感的光纤光栅压力传感器[J].传感技术学报,2005,18(1):177-179. 被引量:10
  • 3王雪珍,卞保民,纪运景,李振华.单模光纤弯曲损耗理论模型的修正[J].光子学报,2006,35(6):819-823. 被引量:13
  • 4范典.光纤光栅金属化封装及传感特性试验研究[J].传感技术学报,2006,19(4):1234-1237. 被引量:21
  • 5程德福,王君,凌振宝,王言章.传感器原理及应用[M].北京:机械工业出版社,2007.
  • 6Mou C B, Saffari P, Li D Z, et al. Smart Structure Sensors Based on Embedded Fibre Bragg Grating Arrays in Aluminum Alloy Matrix by Ultrasonic Consolidation [ J ]. Measurement Science and Technology,2009,20 ( 3 ) : 1-6.
  • 7Muhd-Satar N J, Abd-Rahman M K, Optical Fiber Sensor for Smart Structure Monitoring [ J ]. Progress of Physics Research in Malaysia. 2010,1250 : 137-140.
  • 8Li X C. Embedded Sensors in Layered Manufacturing [ D ]. USA : Stanford University,2001.
  • 9Sundaresan M J,Pai P F,Ghoshal A,et al. Methods of Distributed Sensing for Health Monitoring of Composite Material Structure[ J]. Composites Part A : Applied Science and Manufacturing, 2001,32 (9) :1357-1374.
  • 10Sandlin S, Kinnunen T, Ramo J, et al. A Simple Nethod for Metal Re-Coating of Optical Fibre Bragg Gratings [ J ]. Surface and Coatings Technology, 2006,201 ( 6 ) : 3061 - 3065.

引证文献4

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部