期刊文献+

The effect of urea pretreatment on the formaldehyde emission and properties of straw particleboard 被引量:2

The effect of urea pretreatment on the formaldehyde emission and properties of straw particleboard
下载PDF
导出
摘要 For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde (UF) resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the formaldehyde emission, physical and mechanical properties of the manufactured particleboard. Wheat straws were treated at three levels of urea concentration (5%, 10%, 15%) and 95℃ as holding temperature. Wheat straw particleboards were manufactured using hot press at 180℃ and 3 MPa with two types of UF adhesive (UF-45, UF-91). Then the formaldehyde emission values, physical properties and mechanical properties were considered. The results show that the for- maldehyde emission value was decreased by increasing urea concentration. Furthermore, the results indicate that the specimens under urea treatment have better mechanical and physical properties compared with control specimens. Also specimens under urea treatment at 10% concentration and UF-91 type adhesive have the most optimum physical and mechanical strength. For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde (UF) resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the formaldehyde emission, physical and mechanical properties of the manufactured particleboard. Wheat straws were treated at three levels of urea concentration (5%, 10%, 15%) and 95℃ as holding temperature. Wheat straw particleboards were manufactured using hot press at 180℃ and 3 MPa with two types of UF adhesive (UF-45, UF-91). Then the formaldehyde emission values, physical properties and mechanical properties were considered. The results show that the for- maldehyde emission value was decreased by increasing urea concentration. Furthermore, the results indicate that the specimens under urea treatment have better mechanical and physical properties compared with control specimens. Also specimens under urea treatment at 10% concentration and UF-91 type adhesive have the most optimum physical and mechanical strength.
出处 《Journal of Forestry Research》 CAS CSCD 2012年第3期497-502,共6页 林业研究(英文版)
关键词 formaldehyde emission physical and mechanical properties wheat straw particleboard Urea formaldehyde resin formaldehyde emission physical and mechanical properties wheat straw particleboard Urea formaldehyde resin
  • 相关文献

参考文献20

  • 1BoquiJIon N, Elbez G, Schonfeld U. 2004. Properties of wheat straw particleboards bonded with different types of resin. Journal 0/ Wood Science, 50(3): 230-235.
  • 2Copur Y, GUier C, Tascioglu C, Tozluoglu A. 2008. Incorporation of hazelnut shell and husk in MDF production. Bioresource Technology. 99(15): 7402-1406.
  • 3Dunky M, Pizzi A, Leemput MY. 2002. Wood adhesion and glued products. Report on the State oftheArt, COST Action E13 - WG I, 1st Edition.
  • 4Dunky M. 1998. Urea-formaldehyde (UF) adhesive resins for wood. International Journal 0/ Adhesion and Adhesives, 18(2): 95-107.
  • 5EN 310. 1993. Wood-based panels, determination of modulus of elasticity in bending and bending strength. Brussels, Belgium: European Committee for Standardization.
  • 6EN 317. 1993. particleboards and fibreboards, determination of swelling in thickness after immersion. Brussels, Belgium: European Committee for Standardization.
  • 7EN 319. 1993. Particleboards and fibreboards, determination of tensile strength perpendicular to plane of the board. Brussels, Belgium: European Committee for Standardization.
  • 8EN 717-3. 1996. Wood-based panels, Determination of formaldehyde release by the flask method. Brussels, Belgium: European Committee for Standardization.
  • 9Han G, Umemura K, Zhang M, Honda T, Kawai S. 2001. Development of high-performance UF-bonded reed and wheat straw medium-density fiberboard. Journal of Wood Science, 47(5): 350-355.
  • 10Han G, Umemura K, Kawai S, Kajita H. 1999. Improvement mechanism of bondability in UF -bonded reed and wheat straw boards by silane coupling agent and extraction treatments. Journal of Wood Science, 45(4): 299-305.

同被引文献37

引证文献2

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部