期刊文献+

结合面法向和切向接触刚度的MPSO-BP神经网络算法的建模 被引量:13

Machine joints normal and tangential contact stiffness modeling based on MPSO-BP neural network algorithm
下载PDF
导出
摘要 提出一种基于改进的粒子群和BP神经网络相结合的算法模型,用改进粒子群优化算法优化BP神经网络参数。以机械结合面法向接触刚度和切向接触刚度作为算例。考虑结合面配对副材料、接触载荷、表面加工方法、表面粗糙度和结合面间的介质作为主要因素,对8组结合面法向和切向接触刚度进行预测建模,并对仿真与实验结果进行比较与误差分析。结果表明,该方法实现了多种影响因素组合下的机械结合面法向和切向接触刚度较高精度的建模和预测。 An algorithm model combining the modified particle swarm optimizer (MPSO) and the BP neural network is proposed. The normal and tangential contact stiffness of machined joints is influenced by many factors such as joint material, surface machining method, interface pressure, contact roughness and interface medium. The normal and tangential contact stiffness of 8 groups of machined joints is forecasted under certain experimental conditions. The simulation and experimental results are compared and error analyzed. The results show that the method is high precision to achieve the normal and tangential contact stiffness modeling and forecasting of machined joints under various affecting factors.
出处 《仪器仪表学报》 EI CAS CSCD 北大核心 2012年第8期1856-1861,共6页 Chinese Journal of Scientific Instrument
基金 国家973计划(2009CB724406) 国家重大科技专项课题(2009ZX04014-32)资助项目
关键词 改进PSO—BP神经网络算法 法向和切向接触刚度 预测 modified PSO-BP neural network normal and tangential contact stiffness forecasting
  • 相关文献

参考文献15

  • 1KONRAD K.Experimental research and molding of normal contact stiffness and contact damping of machined joint surfaces[J].Advances in Manufacturing Science and Technology,2009,3(33):53-68.
  • 2赵宏林,丁庆新,曾鸣,刘学杰.机床结合部特性的理论解析及应用[J].机械工程学报,2008,44(12):208-214. 被引量:70
  • 3KARTAL M E,MULVIHILL D M.Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation[J].Trib.Intern.,2011,44:1188-1198.
  • 4FU W P,HANG Y M,ZHANG G P.Experimental investigation of dynamic normal characteristics of machine joint surfaces[J].Journal of Vibration and Acoustics,Trans.ASME,2000,122(4):393-398.
  • 5CIAVARELLA M,MUROLO G,DEMELIO G,et al.Elastic contact stiffness and contact resistance for the weierstrass Profile[J].J.Mech.Phys.Solids,2004,52(6):1247-1265.
  • 6温淑花,张学良,倪润堂.机械结合面切向接触阻尼的神经网络结构化建模[J].农业机械学报,2002,33(1):87-89. 被引量:7
  • 7GOERKE D,WILLNER K.Normal contact of fractal surfaces-experimental and numerical investigations[J].Wear,2008,264:589-598.
  • 8GARLAND P P,ROGERS R J.An experimental study of contact forces during oblique elastic impact[J].Journal of Applied Mechanics,ASME,2009,76:031015-8.
  • 9杨红平,傅卫平,王雯,杨世强,李德信.小波系数表征机械加工表面分形特征的计算方法[J].仪器仪表学报,2010,31(7):1454-1459. 被引量:11
  • 10JIANG SH Y,ZHENG Y.J.ZHU H.A Contact stiffness model of machined plane joint based on fractal theory[J].Journal of Tribology,ASME,2010,132:011401-7.

二级参考文献72

共引文献153

同被引文献97

引证文献13

二级引证文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部