摘要
目前压阻式压力传感器灵敏度优化计算仅基于压阻条整体性几何分布,在相关参数的优化上存在局限性,且在模型及计算等方面有一定误差。本文提出一种专门用于SOI压力传感器,通过精确分析敏感栅的栅数、栅长以及其坐标分布的最佳组合参数,结合不同量程芯体膜厚的计算,达到传感器灵敏度优化的方法。基于Microsoft Visual C++平台以及有限元、数值分析等接口技术,采用参数化建模,有限元分析仿真,数值后处理,编制循环分析算法,设计SOI压力传感器灵敏度优化程序。通过实验数据验证优化设计与实际吻合较好。
The common approaches to sensitivity optimization simulation was based on the piezoresistive geometric distribution.However,there were some Limitations on the related optimization parameters,and it might have some errors during modeling and calculations.This paper presented one of the method for sensitivity optimization which devoted to SOI pressure sensor.To approach that it was combined the proper parameters for the number,length and coordinates of Sensing Grid Element with a different range of core body thickness calculation through accurate analysis.Design Optimization software for the Sensitivity of SOI Pressure Sensor was developed based on Microsoft Visual C ＋ ＋ platform,and which using the interface technologies for the finite element and numerical analysis,building the model parametrically,performing finite element solution,doing post-processing using numerical tools.It was concluded that the optimization data agreed well with the actual through experiments.
出处
《传感技术学报》
CAS
CSCD
北大核心
2012年第8期1064-1068,共5页
Chinese Journal of Sensors and Actuators
关键词
SOI压力传感器
灵敏度
优化设计
有限元
敏感栅
SOI pressure sensor
sensitivity
design optimization
finite element
sensing grid element
