摘要
针对2个典型均质土坡,采用不平衡推力法计算滑动面的安全系数,从而构建了边坡可靠度分析的功能函数,随机产生一系列潜在可行滑动面;假定了不同的强度变异参数,分别利用蒙特卡罗法计算其可靠度指标,并与其确定性分析的安全系数进行了对比.研究结果表明:当滑动面的安全系数与其可靠度指标存在显著的单调对应关系时,临界滑动面与临界可靠度滑动面基本重合;而当两者之间不存在显著的单调对应关系时,临界滑动面与临界可靠度滑动面存在显著区别,对于均质土坡,两者的可靠度指标相差10%左右,而对于两层土坡而言,二者的可靠度指标相差高达70%.
The unbalanced thrust force method was adopted to calculate the factor of safety for given circular slip surface thereby defining the performance function in reliability analysis.A series of potential slip surfaces were randomly generated and their reliability indexes by Monte Carlo method and factors of safety by unbalanced thrust force method were obtained respectively.The curves between factors of safety and reliability indexes were provided.The comparative research shows that the critical slip surface is identical with critical reliability slip surface if the curve is considerably monotonous;otherwise,the considerable difference between critical slip surface and critical reliability slip surface is noticed.The deviation can be up to approximate 10% for homogeneous soil slope and up to 70% for soil slopes containing two soil layers.
出处
《华中科技大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2012年第9期81-84,100,共5页
Journal of Huazhong University of Science and Technology(Natural Science Edition)
基金
国家自然科学基金资助项目(51008167)
山东省高等学校科技计划项目(J10LE07)
教育部高等学校博士学科点专项科研基金资助项目(20103721120001)
关键词
边坡稳定
可靠度分析
极限平衡法
蒙特卡罗法
安全系数
临界滑动面
slope stability
reliability analysis
limit equilibrium method
Monte Carlo method
factor of safety
critical slip surface
