摘要
研究了pH值、温度、电流密度以及主盐的质量浓度对低温镀铁层沉积速率的影响。结果表明:当pH值为1.0时,镀层的沉积速率最大;随着温度的升高,电流密度的增加或者镀液中主盐的质量浓度的增加,镀层的沉积速率增大。
The effects of pH value, temperature, current density and main salt mass concentration on the deposition rate of low temperature iron coating was studied. The results show that the deposition rate is the highest when pH value is 1. 0; the deposition rate will go up with the increasing of temperature, current density or mass concentration of main salt in the plating solution.
出处
《电镀与环保》
CAS
CSCD
北大核心
2012年第6期16-17,共2页
Electroplating & Pollution Control
关键词
镀铁层
PH值
温度
电流密度
主盐
沉积速率
iron coating
pH value
temperature
current density
main salt
deposition rate
