期刊文献+

TiNi形状记忆合金与不锈钢激光焊接头裂纹分析及防止措施 被引量:4

Analysis and prevention of cracks in laser-welded joint of TiNi shape memory alloy and stainless steel
下载PDF
导出
摘要 采用激光焊对TiNi形状记忆合金与不锈钢异种材料进行焊接,用扫描电镜和激光共聚焦显微镜研究了TiNi合金/不锈钢接头裂纹及断口特征,分析了焊缝裂纹的形成机理,并提出了防止裂纹的措施.结果表明,裂纹多以微裂纹的形式出现于焊缝中心和TiNi合金侧熔合区.焊缝中存在大量的脆性化合物是产生裂纹的内在原因,接头受到拉伸应力是产生裂纹的必要条件,焊缝裂纹是二者共同作用的结果.通过焊接区加镍和钴中间层材料、改变激光光斑位置、焊接区施加轴向力及优化激光焊接参数的方法均能在一定程度上改善焊缝金属的裂纹敏感性,其中加金属中间层效果更为明显,加镍和钴中间层后,接头抗拉强度分别达到372和347 MPa,比未加中间层的接头的抗拉强度分别提高98.9%和85.6%. Dissimilar metal joints of TiNi shape memory alloy wire and stainless steel wire were welded by laser welding method.The cracks feature and fracture surface morphology of joints were examined by using scanning electron microscopy(SEM) and confocal laser scanning microscope(CLSM).The mechanism of crack formation were analyzed,and some measurenents were taken to control the welding cracks.The results showed that the micro-cracks usually emerged in the center of the weld zone and fusion zone of TiNi alloy side.The existence of a large number of brittle compounds in the weld was internal cause of cracks,and the joint subjected to tensile stress was the necessary condition of cracks.The cracking susceptibility can be improved to a certain extent by adding Ni interlayer,Co interlayer,changing the laser beam position,applying an axial force to weld zone and optimizing the laser welding parameters.Adding metal interlayer was a more effective method.The tensile strength reached 372 MPa and 347 MPa respectively by using Ni and Co interlayer,and the joint strength increased by 98.9% and 85.6% respectively,compared with the joint without metal interlayer.
出处 《焊接学报》 EI CAS CSCD 北大核心 2012年第12期41-44,115,共4页 Transactions of The China Welding Institution
基金 国家自然科学基金资助项目(50975122)
关键词 TINI形状记忆合金 不锈钢 激光焊 裂纹 TiNi shape memory alloy wire stainless steel wire laser welding cracks
  • 相关文献

参考文献7

二级参考文献23

  • 1邱小明,李明高,孙大千,刘卫红.TiNi形状记忆合金与不锈钢钎焊接头的微观组织与性能[J].机械工程学报,2005,41(2):132-136. 被引量:6
  • 2牛济泰,王蔚青,王儒润,常补怀.NiTi形状记忆合金丝焊接工艺的研究[J].宇航材料工艺,1994,24(5):12-16. 被引量:6
  • 3张汇文,岳鑫,张九海,冯吉才.钛合金与不锈钢的钎焊和扩散焊技术研究现状及发展趋势[J].焊接,2006(1):11-16. 被引量:16
  • 4沈利群,周涟庚.形状记忆合金的应用现状[J].上海金属,1996,18(6):33-35. 被引量:11
  • 5Shiue R H, Wu S K. Infrared brazing of TiSONi50 shape memory alloy using two Ag-Cu-Ti active braze alloys[ J ]. Intermetallics, 2006, 14(6) :630 - 638.
  • 6Casper V E, Fostervoll H, Zuhair K, et al. Plasma welding of NiTi to NiTi, stainless steel and hastelloy-C276[C]//Pittsburgh, Pennsylvania, USA: ASM Materials Solutions 2003 Conference, 2003: 13 - 15.
  • 7Gugel H, Schuermann A, Theisen W. Laser welding of NiTi wires [J]. Materials Science and Engineering, 2008, 481 -482(1): 668 - 671.
  • 8Qiu x M, Li M G, Sun D Q, et al. Study on brazing of TiNi shape memory alloy with stainless steels[J]. Journal of Materials Processing Technology, 2006, 176( 1 - 3) : 8 - 12.
  • 9上西啓介,小林紘二郎.形狀記憶合金とステンレス鋼のろぅ付[J].溶接技术,2004,52(6):75-79.
  • 10Yang T Y, Shiue R K, Wu S K. Infrared brazing of Ti50Ni50 shape memory alloy using pure Cu and Ti-15Cu-15Ni foils[J]. Intermetallics, 2004,12(12): 1285- 1292.

共引文献22

同被引文献23

引证文献4

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部