期刊文献+

基于有限次检修机会的备件最优检修策略 被引量:1

Optimal inspection strategy for a standby unit based on finite inspection opportunities
下载PDF
导出
摘要 针对备份部件检修实践中存在的假设主部件失效时间服从指数分布,只考虑无限次、等间隔检修策略的问题,为减少冗余备份部件的失效风险,提高整体系统的可靠性与安全性,提出一种备件有限次、不等间隔最优检修策略。首先将主部件的失效时间分布推广到威布尔分布,然后构建一种新的期望成本模型,在该模型的基础上,提出了最优检修策略的一些结构性质。根据这些结构性质,可以保证最优检修策略的存在。并且只需确定第一次检修时间,后续的最优检修时间便可通过结构性质迭代得到。最后针对惯性测量组件备份陀螺仪的最优检修策略问题进行了仿真,结果表明该检修策略的有效性。与等间隔的检修策略相比较,所提方法能够降低维护成本和管理风险,比较适合工程实际应用。 Aiming at the problems that the inspection policy of the standby unit mainly focuses on equal interval inspection with infinite number of inspection opportunities under the assumption that the failure time of the main unit follows exponential distribution existing in standby unit inspection practice. In order to reduce the failure risk of the standby unit and improve the reliability and safety of the whole system, an unequal interval optimal inspection policy with finite number of inspection opportunities is proposed. First, the failure time dis- tribution of the main unit is extended to the Weibull distribution. Second, a new expected cost model is constructed;then some structural properties of the optimal inspection policy are developed based on this model. According to these properties, the existing of the optimal in- spection policy can be guaranteed. Moreover, it is necessary to only determine the first inspection time, and the subsequent inspection time could be obtained from the structural property iteratively. Finally, the optimal inspection strategy of the standby gyros in inertial measurement unit was simulated. The simulation result indicates the effectiveness of the proposed inspection policy. Compared with equal interval inspection policy, the developed method can reduce maintenance cost and management risk, and is suitable for practical engineering application.
出处 《仪器仪表学报》 EI CAS CSCD 北大核心 2012年第12期2667-2673,共7页 Chinese Journal of Scientific Instrument
基金 国家自然科学基金(61004069 61174030)资助项目
关键词 可靠性 备件 检修策略 reliability standby unit inspection strategy
  • 相关文献

参考文献17

  • 1刘旭东,何传五,李东.捷联式惯性部件冗余设计[J].中国惯性技术学报,1995,3(4):43-49. 被引量:7
  • 2YEH R H, CHEN H D, WANG C H. An inspection model with discount factor for products having weibull lifetime [ J ]. International Journal of Operations research, 2005,2 ( 1 ) :77-81.
  • 3SHARAREH T, DRAGAN B, JARDINE A K S. Periodic inspection optimization model for a complex repairable system [ J ]. Reliability Engineering and System Safety,2010, 95 ( 9 ) : 944 -952.
  • 4王社伟,张洪钺.冗余配置捷联惯性导航系统可靠性分析[J].航天控制,1999,17(3):71-77. 被引量:5
  • 5WANG W. A joint spare part and maintenance inspection optimization model using the delay-time concept [ J 1. Reli- ability Engineering and System Safety, 2011,96 ( 11 ) : 1535-1541.
  • 6方甲永,肖明清,周越文,王邑.电子产品动态损伤最优估计与寿命预测[J].仪器仪表学报,2011,32(4):807-812. 被引量:12
  • 7邓昌建.基于拟似然函数的集成仪器可靠性估计[J].仪器仪表学报,2011,32(6):1414-1419. 被引量:8
  • 8NAKAGAWA T, YASUI K. Approximate calculation of optimal inspection times [ J ]. The Journal of the Opera- tional Research Society, 1980,31 ( 9 ) : 851-853.
  • 9SHARAREH T, DRAGAN B. Optimum inspection interval for a system under periodic and opportunistic inspections [ J]. IIE Transactions,2012,44( 11 ) :932-948.
  • 10WANG W. An inspection model based on a three-stage failure process [ J ]. Reliability Engineering and System Safety, 2011,96 ( 7 ) : 838 -848.

二级参考文献63

共引文献47

同被引文献3

  • 1MH/T0417-2004,空中交通管制S波段一次监视雷达设备技术规范[S].2004.
  • 2Raytheon Systems Canada Ltd., ASR10SS E- quipment manual[M]. Canada, 1998.
  • 3李斌,张冠杰.场面监视雷达技术发展综述[J].火控雷达技术,2010,39(2):1-7. 被引量:28

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部