期刊文献+

离子交换法制备聚酰亚胺/氧化铝复合薄膜及性能研究 被引量:10

Fabrication and properties of polyimide film with aluminum oxide composite layer via ion exchange technique
下载PDF
导出
摘要 采用离子交换技术以氯化铝溶液为铝源制备出了上下两个表层含氧化铝的聚酰亚胺/氧化铝(PI/Al2O3)复合薄膜。对制备的复合薄膜的形貌、力学性能、热性能和电性能进行了表征和测试,并与纯PI薄膜进行了对比。扫描电镜(SEM)结果显示复合薄膜表面无可见粒子,能谱(EDS)显示复合薄膜表面含有Al元素;力学测试结果显示复合薄膜基本上维持了纯膜优越的力学性能;热失重(TG)表明复合薄膜比纯膜有更好的热稳定性;击穿场强测试结果表明复合薄膜击穿场强由原纯膜的291kV/mm提高到了303kV/mm;耐电晕测试结果表明复合薄膜的耐电晕时间由原纯膜的8min提高到了53min,比原纯膜有了很大提升。 Aluminum oxide (A12 O3 ) composite layer exchange technique. Composite film was tested for on flexible polyimide (PI) substrate was prepared via an ion the mechanical properties, thermal and electrical properties and compared with original film. SEM showed that composite film surface had no visible particle, EDS showed there were A1 element in the surface of composite PI film. Mechanical results showed that composite film main- tain the excellent mechanical property of original PI film. TG results showed that thermal property of compos- ite film was better than original PI film. Breakdown field strength of composite film was 303kV/mm while orig- inal PI film was 291kV/mm. Corona-resistant test results showed that the corona-resistant time of composite film greatly improved compared with original PI film from 8min up to 53min.
出处 《功能材料》 EI CAS CSCD 北大核心 2013年第5期740-743,共4页 Journal of Functional Materials
基金 国家自然科学基金资助项目(51177030 50137010) 国家重点基础研究发展计划(973计划)资助项目(2012CB723308) 黑龙江省自然科学基金重点资助项目(ZD201004) 黑龙江省电介质工程重点实验室前沿预研资助项目(103509)
关键词 聚酰亚胺 复合薄膜 离子交换 表面处理 耐电晕性能 polyimide composite film ion exchange surface modification corona-resistant property
  • 相关文献

参考文献8

  • 1陈慧丹,刘晓玉,陈昊,李娟,范勇.纳米硅/铝氧化物杂化聚酰亚胺薄膜电性能研究[J].绝缘材料,2008,41(6):37-40. 被引量:4
  • 2杨立倩.聚酰亚胺/SiO2-A1:O3^3层复合膜的制备与表征[D].哈尔滨:哈尔滨理工大学,2008.
  • 3范勇,李彦如,陈昊.纳米杂化聚酰亚胺薄膜耐电晕性和击穿场强研究进展[J].哈尔滨理工大学学报,2012,17(1):1-5. 被引量:17
  • 4刘立柱,高琳,宋玉侠,赵洪,雷清泉.偶联剂用量对聚酰亚胺杂化薄膜结构与性能的影响[J].功能材料,2008,39(5):814-816. 被引量:8
  • 5Wu Z P, Wu D Z, Qi S L. Preparation of surface conduc- tive and highly reflective silvered polyimide films by sur- face modification and in situ self-metallization technique [J]. Thin Solid Films, 2005, 493: 179-184.
  • 6Wu Z P, Wu D Z, Yang W T. Preparation of highly re- flective and conductive metalized polyimide films through surface modification: processing, morphology and prop- erties[J]. J MaterChem, 2006, 16(3): 310-316.
  • 7Mu S X, Wu D Z, WANG Y. Fabrication of nickel ox- ide nanocomposite layer on a flexible polyimide substrate via ion exchange technique[J]. Applied Materials and In- terfaces, 2010, (2): 111-118.
  • 8刘立枉,木土侠,翁发,寺.粜既业股/刑木A12U33层复合薄膜的制备[J].功能材料,2009,40(2):236-238.

二级参考文献30

共引文献26

同被引文献81

引证文献10

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部