摘要
橡胶隔震支座是隔震工程中的主要隔震装置,其中以铅芯橡胶支座应用最为广泛,但由于铅对环境的污染以及对人体健康的损害,开发其替代品是必要的.文章制作了中孔直径相同的铅芯橡胶支座和锡芯橡胶支座,进行了压剪试验.结果表明:锡芯的屈服力明显大于铅芯,实测约为1.68倍,屈服后刚度未因芯棒材料的不同而发生改变,锡芯橡胶支座可作为铅芯橡胶支座替代产品之一.
Rubber bearings are main isolation device used in widely applied in all kinds of rubber bearings. Due to lead isolation buildings. Lead rubber beating is most pollution of the environment and harm to human health, the development of alternatives is necessary. In the paper, the lead rubber beatings and tin rubber bear- ings, which are the same for inner diameter of reinforcing steel plate, were produced. Pressure-shear tests are carried out. The testing result shows that yielding load of tin rubber bearing is significantly greater than that of lead rubber bearing, and post yield stiffness does not change. Tin rubber bearing can be used as alternative of lead rubber bearing.
出处
《广州大学学报（自然科学版）》
CAS
2013年第1期48-51,共4页
Journal of Guangzhou University:Natural Science Edition
基金
"十一五"国家科技支撑项目(2009BAJ28B03)
国家自然科学基金资助项目(51078097)
广东省科技计划资助项目(2010B090400469)
关键词
橡胶隔震支座
铅芯橡胶支座
锡芯橡胶支座
屈服力
屈服后刚度
elastomeric seismic-protection isolator
lead robber bearing
tin rubber bearing
yielding load
post yield stiffness
