期刊文献+

3D analysis for pit evolution and pit-to-crack transition during corrosion fatigue 被引量:2

3D analysis for pit evolution and pit-to-crack transition during corrosion fatigue
原文传递
导出
摘要 This paper presents a deterministic model to predict the pit evolving morphology and crack initiation life of corrosion fatigue.Based on the semi-ellipsoidal pit assumption,the thermodynamic potential including elastic energy,surface energy and electrochemical energy of the cyclically stressed solid with an evolving pit is established,from which specific parameters that control the pit evolution are introduced and their influence on the pit evolution are evaluated.The critical pit size for crack nucleation is obtained from stress intensity factor criterion and the crack nucleation life is evaluated by Faraday's law.Meanwhile,this paper presents a numerical example to verify the proposed model and investigate the influence of cyclic load on the corrosion fatigue crack nucleation life.The corrosion pit appears approximately as a hemisphere in its early formation,and it gradually transits from semicircle to ellipsoid.The strain energy accelerates the morphology evolution of the pit,while the surface energy decelerates it.The higher the stress amplitude is,the smaller the critical pit size is and the shorter the crack initiation life is. This paper presents a deterministic model to predict the pit evolving morphology and crack initiation life of corro- sion fatigue. Based on the semi-ellipsoidal pit assumption, the thermodynamic potential including elastic energy, surface energy and electrochemical energy of the cyclically stressed solid with an evolving pit is established, from which specific parameters that control the pit evolution are introduced and their influence on the pit evolution are evaluated. The critical pit size for crack nucleation is obtained from stress intensity factor criterion and the crack nucleation life is evaluated by Faraday's law. Mean- while, this paper presents a numerical example to verify the proposed model and investigate the influence of cyclic load on the corrosion fatigue crack nucleation life. The corrosion pit appears approximately as a hemisphere in its early formation, and it gradually transits from semicircle to ellipsoid. The strain energy accelerates the morphology evolution of the pit, while the surface energy decelerates it. The higher the stress amplitude is, the smaller the critical pit size is and the shorter the crack initiation life is.
出处 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2013年第4期292-299,共8页 浙江大学学报(英文版)A辑(应用物理与工程)
基金 Project supported by the National Natural Science Foundation of China(No.10772116) the Fundamental Research Funds for the Central Universities(Nos.12CX04017B and 13CX02091A)
关键词 PIT Evolving morphology Thermodynamic potential Critical pit size Crack nucleation Pit, Evolving morphology, Thermodynamic potential, Critical pit size, Crack nucleation
  • 相关文献

参考文献30

  • 1Bhuiyan, M.S., Mutoh, Y., Murai, T., lwakami, S., 2008. Cor- rosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments. In- ternational Journal of Fatigue, 30(10-11):1756-1765. [doi: 10.1016/j.ijfatigue.2008.02.012].
  • 2Chen, G.S., Wan, K.C., Gao, M., Harlow, D.G., Wei, R.P., 1996. Transition from pitting to fatigue crack growth- modeling of corrosion fatigue crack nucleation in a 2024-T3 aluminum alloy. Materials Science and Engi- neering: A, 219(1-2):126-132. [doi:10.1016/S0921-5093 (96)10414-7].
  • 3Codaro, E.N., Nakazato, R.Z., Horovistiz, A.L., Ribeiro, L.M.F., Ribeiro, R.B., Hein, L.R.O., 2002. An image processing method for morphological characterization and pitting corrosion evaluation. Materials Science and En- gineering: A, 334(1-2):298-306. [doi:10.1016/S0921 -5093(01 )01892-5].
  • 4Ebara, R., 2007. Corrosion fatigue crack initiation in 12% chromium stainless steel. Materials Science and Engi- neering: A, 468-470:109-113. [doi:10.1016/j.msea.2006. 09.128].
  • 5Ernst, P., Laycock, N.J., Moayed, M.H., Newman, R.C., 1997. The mechanism of lacy cover formation in pitting. Cor- rosion Science, 39(6):1133-1136. [doi:10.lO16/SOO10- 938X(97)00043-7].
  • 6Eshelby,-- J,D.," " 1957. Tie determination of the elastic field of an ellipsoidal inclusion, and related problems. Proceedings 9f the Royal Society of London, Series A, Mathematical and Physical Sciences, 241(1226):376-396. [doi:10.1098/ rspa. 1957.0133].
  • 7Ghali, E., Dietzel, W., 2004. Testing of general and localized corrosion of magnesium alloys: a critical review. Journal of Materials Engineering and Performance, 13(1):7-23. [doi:10.1361110599490420665].
  • 8Harlow, D.G., Wei, R.P., 1994. Probability approach for pre- diction of corrosion and corrosion fatigue life. AIAA Journal, 32(10):2073-2082.
  • 9Harlow, D.G., Wei, R.P., 1998. A probability model for the growth of corrosion pits in aluminum alloys induced by constituent particles. Engineering Fracture Mechanics, 59(3):305-325. [doi: 10.1016/S0013-7944(97)00127-6].
  • 10Harlow, D.G., Wei, R.P., 2001. Probability modeling and sta- tistical analysis of damage in the lower wing skins of two retired B-707 aircraft. Fatigue & Fracture of Engineering Materials & Structures, 24(8):523-535. [doi:10.1046/ j.1460-2695,2001.00402.x].

同被引文献18

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部