期刊文献+

半圆柱面涡流发生器在矩形管道内抑垢实验 被引量:6

Experimental of restraining fouling of semi-circular cylinder vortex generators in rectangular channel
下载PDF
导出
摘要 半圆柱面涡流发生器具有较好的强化传热效果,在换热器设备上具有较大的应用前景。为了获得半圆柱面涡流发生器的抑垢特性,采用离线称重法,研究了在流速为0.2m/s、体积质量为3 500mg/L、温度为50℃下不同排列间距、不同高度下的半圆柱面涡流发生器对CaSO4污垢结垢量的变化。结果表明:半圆柱面涡流发生器具有抑垢性,总结垢量要少于光片;相同高度下间距20mm的试片结垢量最少;相同间距下高为5mm的试片结垢量最小。 Semi-circular vortex generators has good heat transfer enhancement effect, and thus great application prospect in heat exchanger equipments. In order to get the characteristic restraining fouling of semi-circular vortex generators, the effect of different height of the c m/s, a concentration of yli 3 nder on the GAS04 dirt fouling was inves 500 mg/L, and a temperature of 50 ℃. has of different arrangement spacing and tigated with a flow volecity of 0.2 Result shows that: semi-circular vortex generators have the characteristic of restraining fouling ,and those fouling quantity that on the test pieces with noney; the same height below spacing 20 mm specimen scaling least; under the same distance high for 5 mm specimen scaling quantity minimum. is less than quantity at
出处 《热科学与技术》 CAS CSCD 北大核心 2013年第1期52-56,共5页 Journal of Thermal Science and Technology
基金 国家自然科学基金资助项目(51076025)
关键词 半圆柱面涡流发生器 高度 间距 CaSO4污垢 传热 semi-circular vortex generators height distance CagO4 fouling heat teansfer
  • 相关文献

参考文献13

  • 1SCHUBAUER G B, SPANGENBERG W G. Forced mixing in boundary layers [J]. J of Fluid Mech, 1960, 8:10-31.
  • 2JOHNSON T R, JOUBERT P N. The influence of vortex generators on drag and heat transfer from a circular cylinder normal to an airstream [J]. J of Heat Transfer, 1969, 91:91-99.
  • 3FIEBIG M. Embedded vortices in internal flow heat transfer and pressure loss enhancement [J]. Heat and Fluid Flow, 1995, 16(5):376-388.
  • 4WU J M, TAO W Q. Investigation on laminar convection heat transfer in fin-and-tube hear exchanger in aligned arrangement with longitudinal vortex generator from the view point of field synergy principle [J]. Appl Therm Eng, 2007, 27(14/15): 2609- 2617.
  • 5SOHANKAR A. Heat transfer augmentation in a rectangular channel with a vee-shaped votex generator [J]. Int J Heat Fluid Flow, 2007, 28(2):306- 317.
  • 6闵春华,齐承英,谢尚群,孔祥飞.新型矩形翼纵向涡发生器流动与换热实验研究[J].热能动力工程,2010,25(1):43-46. 被引量:6
  • 7JOARDAR A, JACOBI M A. A numerical study of flow and heat transfer enhancement using an array of delta-winglet vortex generators in a fin-and-tube heat exchanger [J]. J of Heat Transfer Trans of the ASME, 2007, 129(9) :1156-1167.
  • 8周国兵,张于峰,齐承英,王艳.几种翼型涡流发生器强化换热及流阻性能的实验研究[J].天津大学学报(自然科学与工程技术版),2003,36(6):735-738. 被引量:19
  • 9叶秋玲,周国兵,程金明,程伟良.涡流发生器强化换热和压降特性的实验设计[J].现代电力,2010,27(2):48-52. 被引量:9
  • 10徐志明,杨善让,郭淑青,赵贺,齐冰.电站锅炉污垢费用估算[J].中国电机工程学报,2004,24(2):196-200. 被引量:40

二级参考文献40

  • 1齐承英,周国兵,曹惠玲,张云鹏,魏晋.新型涡流发生器强化换热实验研究[J].工程热物理学报,2002,23(S1):173-176. 被引量:14
  • 2汪健生,汤俊洁,张金凤.半椭圆涡流发生器强化换热机理[J].机械工程学报,2006,42(5):160-164. 被引量:19
  • 3栗艳,杨泽亮.纵向涡发生器强化传热管的实验研究[J].热科学与技术,2006,5(2):127-132. 被引量:5
  • 4.GB10184-88.电站锅炉性能试验规程(Performance test codefor utility boiler)[S].,1996..
  • 5STEINHAGEN R, STEINHAGEN H M, MAANI K. Problems and costs due to heat exchanger fouling in new zealand industries[J]. Heat Transfer Eng, 1993,14(1) :20-25.
  • 6ZHU J X, FIEBIG M,MITRA N K. Numerical investigation of turbulent flows and heat transfer in a rib-roughened channel with longitudinal vortex generators [J]. Int J Heat Mass Transfer, 1995, 38 : 495 - 501.
  • 7PESTEEI S M,SUBBARAO P M V, AGARWAL R S. Experimental study of the effect of winglet location on heat transfer enhancement and pressure drop in fin -tube heat exchangers [ J ]. Applied Thermal Engineering, 2005, 25 : 1684 - 1696.
  • 8EIBECK P A,EATON J K. Heat transfer effects of a longitudinal vortex embedded in a turbulent boundary layer[J]. J Heat Transfer Transactions ASME, 1987, 109 : 16 -24.
  • 9TIGGLEBECK S, MITRA N K, FfEBIG M. Comparison of wing type vortex generators for heat transfer enhancement in channel flow[J]. J Heat Transfer Transactions ASME, 1994, 116 : 880 -885.
  • 10GENTRY M C,JACOBI A M. Heat transfer enhancement by delta -wing vortex generators on a fiat plate: vortex interactions with the boundary layer[ J]. Exp Therm Fluid Sci, 1997, 14:231 - 242.

共引文献81

同被引文献31

  • 1任保勇.石油和化工行业换热设备污垢问题与治理现状[J].清洗世界,2013,29(5):42-47. 被引量:8
  • 2倪亚琴.涡流发生器研制及其对边界层的影响研究[J].空气动力学学报,1995,13(1):110-116. 被引量:32
  • 3汪健生,张金凤,刘志毅.小尺度涡流发生器强化传热的数值模拟[J].化工学报,2007,58(7):1648-1654. 被引量:10
  • 4Schubauer G B, Spangenberg W G. Forced Mixing in Boundary Layers [ J ]. Journal of Fluid Mechanics, 1960, (8) :10-31.
  • 5Johnson T R, Joubert P N. The Influence of Vortex Generators on Drag and Heat Transfer from a Circular Cylinder Normal to an Air Stream [ J ]. Journal of Heat Transfer, 1969, (91) :91-99.
  • 6Wu J M, Tao W Q. Numerical study on laminar convec- tion heat transfer in a channel with longitudinal vortex generator. Part B : Parametric study of major influence factors [ J ]. International Journal of Heat and Mass Transfer,2008,51 (13-14) :3683-3692.
  • 7Charbel Habch, Serge Russeil. Enhancing heat transfer in vortex generator-type muhifun ctional heat exchangers[ J]. Applied Thermal Engineering, 2012, (38) :14-25.
  • 8Chen Chen, Jyh-Tong Teng. A study on fluid flow and heat transfer in rectangular microchannels with various longitudinal vortex generators [ J ]. International Journal of Heat and Mass Transfer,2014,69:203-214.
  • 9徐志明,刘坐东.涡流发生器CaSO4污垢特性实验研究[D].吉林:东北电力大学,2012.
  • 10Glen N F, Howarth J H, Jenkins A M. The Estimation of Errors and Uncertainty in the Determination of Foul- ing Resistances [ J ]. Proceedings of an International Conference on Understanding Heat Exchanger Fouling and Its Mitigation. Italy, 1997,342-351.

引证文献6

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部