期刊文献+

带夹套平板封头弹塑性有限元分析及优化 被引量:7

Elastic - plastic Finite Element Analysis and Optimization of Flat - plate Head with Jacket
下载PDF
导出
摘要 以带夹套平板封头为研究对象,建立了全实体结构、体-壳连接结构以及全壳结构的有限元模型,通过弹塑性有限元分析,得到了结构的应力和变形,并对不同建模方法的结果进行了比较,发现体-壳连接模型具有计算精度高、时间短的优点。应用分析设计方法并基于最优化理论对封头面板厚度进行优化设计,给出了最佳面板厚度。该研究对此类带夹套平板封头强度的设计具有一定的参考价值。 Based on the elastic-plastic finite element analysis,the finite element model of the flat-plate head with jacket was created,including solid elements structure,solid-shell coupling elements structure and shell elements structure.Then the stress and deformation of the structures were obtained from the models and the results of different modeling methods were compared.It was found that the solid-shell connected model has the advantages of high calculation accuracy and short calculation time.Finally,based on the optimization theory,an optimization model of the flat-plate thickness was developed for obtaining the minimal costs.It would be helpful to the scientific design of the flat-plate head with jacket.
出处 《压力容器》 2013年第1期31-34,共4页 Pressure Vessel Technology
关键词 平板封头 夹套 有限元 优化设计 flat-plate head jacket finite element optimization design
  • 相关文献

参考文献11

二级参考文献43

共引文献838

同被引文献78

  • 1俞论,董瑞兵,刘扬娟.螺杆压缩机转子受力计算[J].压缩机技术,2006(2):18-22. 被引量:10
  • 2黄嗣罗,薛勇,张建勋,陈宗强.管对接全位置焊应力应变场三维有限元数值分析[J].焊接学报,2006,27(4):73-76. 被引量:9
  • 3彭旭东,谢友柏,顾永泉.机械密封端面温度的确定[J].化工机械,1996,23(6):23-28. 被引量:61
  • 4许汉平,晏卫平,朱勤.计入JFO边界条件的斜波度机械密封研究[J].上海大学学报(自然科学版),1996,2(3):308-315. 被引量:7
  • 5李壮云.液压元件与系统[M].北京:机械工业出版社,2012.
  • 6Tetsuya T, Ishiaku U S, Mizoguchi M, et al. The effect of heat sealing temperature on the properties of OPP/CPP heat seal. I. mechanical properties [ J ]. J Appl Polym Sci ,2005,97 (3) :753 - 760.
  • 7张旭良,刘刚连.软塑包装热封强度影响因素研究[J].科技风,2010(18):259-260.
  • 8lshiaku U S, Hashimoto Y, Tetsuya T, et al. Effect of heat sealing temperature on the fracture aspects of OPP/ CPP seal; proceedings of the Society of Plastics Engi- neers Annual Technical Conference 2005 [ C ]. Society of Plastics Engineers. Boston, MA, United states, F,2005.
  • 9Tetsuya T, Hashimoto Y, Ishiaku U S, et al. Effect of heat - sealing temperature on the properties of OPP/ CPP heat seals. Part II. Crystallinity and and thermome- chanical properties [ J ]. J Appl Polym Sci, 2006,99 (2) :513 -519.
  • 10Hashimoto Y, Hashimoto Y, Tsujii T, et al. Effect of hold times at heat sealing temperature on mechanical proper- ties of heat - sealed parts of polylactic acid film [ J ]. Journal of Packaging Science and Technology, 2010,19 (3) :193 -202.

引证文献7

二级引证文献80

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部