摘要
在测定涂料印花织物的耐摩擦色牢度时,所用黏合剂的性能不同,则织物经摩擦力作用后的褪色程度也可能不同,如果色布上褪掉的颜料没有沾到标准白布上,就会造成耐摩擦色牢度好的假象,引起耐摩擦色牢度评定的误差。针对以上问题,通过选择不同的黏合剂及不同的应用工艺条件,考察色布的褪色程度和白布的沾色程度对涂料印花织物摩擦色牢度的影响。结果表明,在评定涂料印花织物的摩擦牢度时,摩擦后标准白布的沾色程度和色布的褪色程度对织物的耐摩擦色牢度的评定同等重要。
When testing rubbing color fastness,the fading and staining degree of pigment printed fabrics may vary with printing binders if different binders are applied.If the faded color from the printed fabric is not stained on the standard white cloth,it will lead to a false phenomenon of good color fastness and result in deviation in the evaluation of rubbing color fastness.In view of this,different binders and printing processes were adopted to investigate the effects of the fading degree of printed fabrics and staining degree on the adjacent white fabric on the rubbing color fastness of the printed fabrics.The experimental results demonstrate that the fading degree of the pigment printed fabric and staining degree of the adjacent white fabric are equally important to the evaluation of the rubbing color fastness of pigment printed fabrics.
出处
《纺织学报》
EI
CAS
CSCD
北大核心
2013年第7期90-94,共5页
Journal of Textile Research
基金
四川省基础研究项目(08JC0338)
关键词
摩擦色牢度
沾色
褪色
涂料印花
rubbing color fastness
color staining
color fading
pigment printing
