期刊文献+

等温时间对自孕育法制备Mg-9Zn-2Al镁合金半固态浆料的影响

Effect of Isothermal Time on Mg-9Zn-2Al Magnesium Alloy Semi-Solid Slurry Prepared by Self-Inoculation Method
下载PDF
导出
摘要 采用自孕育法在线制备Mg-9Zn-2Al镁合金半固态浆料,研究了等温温度为585℃时,等温时间对Mg-9Zn-2Al镁合金半固态组织演变的影响。结果表明,随着保温时间的延长,晶粒先球化而后恶化,并且不断长大,保温4~8min时,其晶粒较好,尺寸为65~72μm,圆整度在1.2~1.3之间。在此过程中,组织的演变主要经历高熔质点相的析出及较小过冷度下的瞬态形核、镁原子堆积促使初生相的长大和a相的合并长大三个阶段。 Semi-solid slurry of Mg-9Zn-2A1 magnesium alloy has been prepared online by self-inoculation method(SIM). The effect of isothermal time on semi-solid microstructure evolution has been investigated with isothermal temperature 585℃. Results showed that with isothermal time prolonging, the grain has been with a process of firstly being spheroidized and then mutilated and continuous to grow. An ideal isothermal time should be limited to 4-8rain for average grain size of 47.5-48.8~m with roundness between 1.2 and 1.3. In isothermal process, Microstructure evolution mainly had three stages including high melting particle precipitation and transient nucleation at smaller undercooling, and grains continuous growing because of magnesium atoms cumulation on the primary phase, and coalescence and growing of α phase.
出处 《中国铸造装备与技术》 CAS 2013年第4期28-32,共5页 China Foundry Machinery & Technology
基金 商洛学院博士启动基金资助项目(12SKY01-1)
关键词 等温时间 半固态浆料 Mg-9Zn-2Al镁合金 自孕育法 Isothermal time Semi-solid slurry Mg-9Zn-2A1 magnesium alloy Self-inoculation method
  • 相关文献

参考文献11

  • 1M.C.Flem ings.Behavior of Metal Alloys in the Semi -solid State.Metall.Trans.,1991,22k (4) :957-981.
  • 2H. Kaufmann, A. Mundi, R.Potzinger,P.J.Uggowitzer,N.Ishibashi.Anupdate on the new rheo-casting development work for Al-and Mg-alloys[J].Die Casting Engineer,2002(4 ): 16-19.
  • 3Z.Fan.Development of the rheo -diecasting process for magnesiumalloys[J].Mater.Sci.Eng.A,2005 (413-414) :72-78.
  • 4J.A.Yurko,R.A.Martinez, M. C. Flemings. Development of semisolidrheocasting (SSR). In:Y. Tsutsui, M. Kiuchi and K.Ichikawa, eds.Proceedings of the 7th International Conference on Semi -solidprocessing of Alloys and CompositesJapan:National Institute ofAdvanced Industrial Science and Technology Japan Society forTechnology of Plasticity, 2002 : 659-664.
  • 5D.Doutre,G.Hay,P.Wales.SEED:A new process for semi-solid form-ing.Canadian Metallurgical and process overview.Solid StatePhenomena, 2006( 116-117):472-477.
  • 6董杰,路贵民,任栖锋,崔建忠.液相线铸造法非枝晶半固态组织形成机理探讨[J].金属学报,2002,38(2):203-207. 被引量:62
  • 7李元东,杨建,马颖.自孕育半固态制浆技术的研究[J].特种铸造及有色合金,2010,30(3):227-230. 被引量:34
  • 8李春,李元东,马颖,陈体军,武慧慧,李艳磊.熔体处理在制备Mg-9Zn-2Al镁合金半固态浆料中的作用[J].中国有色金属学报,2012,22(6):1536-1545. 被引量:10
  • 9李春,李元东,马颖,陈体军,武慧慧,李艳磊.自孕育工艺参数对ZA96镁合金半固态组织的影响及其交互本质[J].中国有色金属学报,2013,23(3):599-609. 被引量:8
  • 10Stefanescu D M,Kanetkar C S.State of the art of counter simulationof casting and solidification process [M].Paris:Les Edition dephysiqne,1986.

二级参考文献54

共引文献97

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部