摘要
Waxy crude oil exhibits complex rheological behavior below the pour point temperature, such as viscoelasticity, yield stress, and thixotropy, owing to the formation of a three-dimensional spongelike interlock network structure. This viscoelasto-thixotropic behavior is an important rheologieal behavior of waxy crude oils, determining the flow recovery and safe restart of crude oil pipelines. Up to now, the thixotropic models for waxy crude have been all viscoplastic models, without considering the viscoelastic part before the yield point. In this work, based on analyzing the variation of the elastic stress and viscous stress in the Mujumbar model, a new viscoelasto-plastic model is proposed, whose shear stress is separated into an elastic component and a viscous component. The elastic stress is the product of the shear modulus and elastic strain; the shear modulus is proportional to the structural parameter. For the elastic strain, we followed the line of Zhu and his coauthors and assumed that it may be expressed by an algebraic equation. The model is validated by stepwise shear rate tests and hysteresis loop tests on Daqing and Zhongyuan waxy crude. The results show that the model＇s fitting and predictive capability is satisfactory.
Waxy crude oil exhibits complex rheological behavior below the pour point temperature, such as viscoelasticity, yield stress, and thixotropy, owing to the formation of a three-dimensional spongelike interlock network structure. This viscoelasto-thixotropic behavior is an important rheologieal behavior of waxy crude oils, determining the flow recovery and safe restart of crude oil pipelines. Up to now, the thixotropic models for waxy crude have been all viscoplastic models, without considering the viscoelastic part before the yield point. In this work, based on analyzing the variation of the elastic stress and viscous stress in the Mujumbar model, a new viscoelasto-plastic model is proposed, whose shear stress is separated into an elastic component and a viscous component. The elastic stress is the product of the shear modulus and elastic strain; the shear modulus is proportional to the structural parameter. For the elastic strain, we followed the line of Zhu and his coauthors and assumed that it may be expressed by an algebraic equation. The model is validated by stepwise shear rate tests and hysteresis loop tests on Daqing and Zhongyuan waxy crude. The results show that the model＇s fitting and predictive capability is satisfactory.
基金
the financial support from the National Natural Science Foundation of China (Grant No.51134006)
Science Foundation of China University of Petroleum (Beijing) (Grant No.LLYJ-2011-55)
