期刊文献+

转炉熔池中废钢的运动 被引量:19

Movement of Scrap in the Bath of Converter
原文传递
导出
摘要 根据相似原理计算了水模喷吹参数,第一次模拟并拍照了在不同熔池搅拌能量条件下,转炉熔池中废钢运动的实际情况,使炼钢工作者对废钢在熔池中的运动有了清楚的了解。测量了废钢对熔池混匀时间和喷溅的影响,大型转炉炼钢熔池中有10%废钢,熔池混匀时间较无废钢时平均延长35.3%,铁水脱磷预处理转炉有10%废钢,熔池混匀时间平均延长62.8%。定量地研究了熔池中不同质量废钢块与悬浮能量之间的关系,为使废钢熔化有良好的动力学条件,应使熔池的搅拌能量不低于大块废钢的悬浮能量。丰富了废钢熔化的基础知识,为转炉合理地利用废钢和优化转炉吹炼工艺提供依据。 The injection parameter of water mold was calculated based on similarity principle. The actual situation of the movement of scrap in molten bath of the converter was simulated for the first time. The impact of scrap on mixing time and splashing was measured. If there are 10% scrap in large converter, the molten bath mixing time is longer 35.3% than no scrap in converter. In hot metal dephosphorization pretreatment converter, 10% scrap will prolong bath mixing time 62.8%. The relationship between the weight of scrap and suspended energy in bath was quantitatively studied. In order to be in good dynamics condition for scrap melting, the stirring energy of the bath should not be less than a large piece of scrap suspension energy. These could supplement the basic knowledge of scrap melt- ing and provide the guidance for the use of scrap in the converter and the optimization of the converter blowing process.
出处 《钢铁》 CAS CSCD 北大核心 2013年第3期24-29,共6页 Iron and Steel
关键词 转炉 废钢 悬浮 涡旋 converter scrap suspension vortex
  • 相关文献

参考文献10

  • 1孙泉有.努力加强废钢铁统计信息工作 为贯彻落实“废钢铁产业‘十二五’发展规划”促进钢铁行业可持续发展做出新贡献[J].中国废钢铁,2011,0(4):4-35. 被引量:2
  • 2Yamamoto T, Ujisama Y, Ishida H, et al. Operation and Design of Scrap Melting Process of the Packed Bed Type[J]. ISIJ, 1999,39(7): 705.
  • 3Szekely J, Chuang Y K, Hlinka J W. The Melting and Disso- lution of Low-Carbon Steels in Iron-Carbon Melts[J]. Metal- lurgical Transactions, 1972, 3(11): 2825.
  • 4Wright J K. Steel Dissolution in Quiescent and Gas Stirred Fe/C Melts[J]. Metallurgical Transactions B, 1989,20 (3) : 363.
  • 5沈颐身,李保卫,吴林,等.冶金传输原理[M].北京:冶金工业出版社,2000:441-451.
  • 6首钢钢研所.国外氧气顶吹转炉炼钢文集[M],北京:冶金工业出版社,1975.
  • 7MilnethomsonLM.理论流体动力学[M].李裕立,晏名文,译.北京:机械工业出版社,1984.
  • 8周光炯.流体力学[M].北京:高等教育出版社,1993.
  • 9赵荣玖,朱文佳.国外转炉顶底复合吹炼技术(上)[M].北京:钢铁编辑部,1985.
  • 10Koria S C, George A. Selection of Bottom Injection Parame- ters in Combined Blown Steelmaking [J]. Ironmaking and Steelmaking, 1988, 15(3):127.

共引文献7

同被引文献127

引证文献19

二级引证文献79

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部