期刊文献+

负载型非晶合金催化剂Ni-W-P/Al_2O_3的制备与性能表征 被引量:1

Preparation and Property Characterization of Supported Amorphous Alloy Catalysts Ni-W-P/Al_2O_3
下载PDF
导出
摘要 选择氧化铝为载体,采用化学镀方法在其表面负载非晶合金,制备负载型非晶合金催化剂Ni-W-P/Al2O3。利用能量色散X射线谱仪(EDX)对非晶合金成分进行分析,表明合金中含钨质量分数4.98%、磷质量分数5.95%。选择不同的温度对非晶合金进行热处理,利用X射线衍射(XRD)对其结构进行了表征,表明钨元素的加入可使非晶态Ni-P合金的晶化温度至少提高了25℃。通过在固定床反应器中费托合成反应制甲烷的实验来评价制备的负载型镍基多元合金催化剂的催化性能。结果表明,Ni-W-P/Al2O3负载型非晶态合金催化剂具有较高的活性和选择性。 In this paper,the supported amorphous alloy catalysts Ni-W-P/Al2O3were prepared using alumina as supports via electroless plating.The composition of amorphous Ni-W-P alloy was characterized by Energy Dispersive X-ray Spectrometer(EDX).The result showed that the Ni-W-P alloy contains 4.98%tungsten,and 5.95% phosphorus.After being heat-treated in different temperature,the amorphous alloy was characterized by X-ray Diffractometer(XRD).The result showed that the crystallization temperature of Ni-P alloy can be enhanced at least 25 ℃ by adding tungsten element.The catalytic property of the prepared supported catalysts was evaluated by Fisher-Tropsch synthesis in a fix-bed reactor.The result showed that the Ni-W-P/Al2O3catalysts exhibit high activity and selectivity.
出处 《青岛科技大学学报(自然科学版)》 CAS 北大核心 2013年第4期357-361,共5页 Journal of Qingdao University of Science and Technology:Natural Science Edition
基金 山东省自然科学基金项目(ZQ2011EMM005)
关键词 非晶态合金催化剂 热稳定性 费托合成 催化性能 amorphous alloy catalysts thermal stability Fischer-Tropsch synthesis catalytic performance
  • 相关文献

参考文献10

  • 1Chen Y. Chemical preparation and characterization of met- al-metalloid ultrafine amorphous alloy particles[J]. Cataly- sis Today, 1998, 44(1/2/3/4) : 3-16.
  • 2Dcng J F, Li H X, Wang W J. Progress in design of new a- morphous alloy catalysts [J] Catalysis Today, 1999, 51 (1): 113-125.
  • 3Zong B N. Amorphous Ni alloy hydrogenation catalyst and magnetically stabilized bed reaction technology [J]. Catal Surv Asia,2007:ll: 87-94.
  • 4Li H, Wu Y, Zhang J, et al. Liquid phase acetonitrile hy- drogenation to ethylamine over a highly active and selective Ni-Co-B amorphous alloy catalyst[J]. Applied Catalysis A: General, 2004,275 ~ 199-206.
  • 5Xie O W, Sun W, Li W. Synthesis and catalytic properties of amorphous Ni-Co-B alloy supported on carbon nanofibers [J]. Catalysis Communications, 2008,10 : 333-335.
  • 6Song L M, Li W, Wang G, et al. A new route to prepare supported nickel phosphide/silica-alumlna hydrotreating catalysts from amorphous alloys[J]. Catalysis Today, 2007, 125:137-142.
  • 7葛少辉,吴志杰,张明慧,李伟,牟诗诚,陶克毅.超声波辅助化学镀制备Ni-B/MgO催化剂及其催化加氢性能[J].催化学报,2006,27(8):690-696. 被引量:9
  • 8严新焕,孙军庆,李波,吕翔,孙孟飞.NI-CE-P非晶态合金催化剂用于氯代硝基苯液相加氢制氯代苯胺[J].催化学报,2006,27(2):178-182. 被引量:20
  • 9胡伟康,张允什,宋德瑛,汪根时,罗道军,申泮文.非晶态MmNi_(5.20)合金薄膜的制备及析氢反应电催化性能的研究[J].功能材料,1994,25(6):515-517. 被引量:3
  • 10李宁.化学镀镍基合金理论与技术[M].哈尔滨:哈尔滨工业大学出版社,2002.118~122.

二级参考文献47

共引文献43

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部