期刊文献+

全淬透钢轴承套圈失效分析及讨论 被引量:4

Analysis and Discussion on Surface Cracks of Bearing Steel Ring
原文传递
导出
摘要 采用金相显微镜、扫描电镜分析了全淬透钢轴承套圈在磨加工后表面出现的裂纹,经高倍分析缺陷处无明显脱碳,经能谱及电镜面扫描分析裂纹内主要元素为氧、铝、钙、锰等元素,且以氧、铝元素为主,其直接原因为夹杂物造成材料宏观裂纹;经讨论脆性夹杂物将严重影响轴承的使用精度及寿命,对该批材料进行全部报废处理。 The occurrence of the surface cracks of the fully hardening bearing steel ring after grinding was analyzed by using an optical microscope,a scanning electron microscope and an energy dispersive spectroscope(EDS).Test results show that oxygen,aluminum,calcium,manganese and other elements were contained in the defects.The main elements are oxygen and aluminum.The direct reason is that inclusions caused the macroscopic crack.The brittle inclusions will seriously affect the actual precision and service life of the bearings.Therefore an end-of-life treatment was conducted on the batch of material.
出处 《物理测试》 CAS 2013年第3期55-57,共3页 Physics Examination and Testing
关键词 轴承钢 全淬透钢 裂纹 夹杂物 bearing steel fully hardening crack inclusions
  • 相关文献

参考文献4

二级参考文献5

  • 1Shinme,K,周国忠.顶吹喷粉去除杂质[J].国外钢铁,1994,19(4):21-26. 被引量:5
  • 2王洪刚,马风容.论影响轴承钢质量的各种因素[J].冶金信息导刊,2006,43(5):30-32. 被引量:4
  • 3钟顺思,王昌生主编.轴承钢[M].北京:冶金工业出版社,2002
  • 4Tricot R. Relative Detrimrntal Effect of Inclusion Service Proper- ties of Bearing Steels //Production and Application of Clean Steels BaIatonfured, Hungaly, The Iron and Steel Institute , June2-4, 1986 . 199.
  • 5Cogne J Y, Hertier B, Monnot J. Cleanness and Fatigue Lift of Bearing Steels// Clean Steels, Balatonfured, Hungary, The Institute of Metals, June2-4,1986.26.

共引文献132

同被引文献42

引证文献4

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部