摘要
断轨检测电路受到传导性干扰中不平衡牵引回流的干扰,为了降低不平衡牵引回流对断轨检测电路的影响,在分析断轨检测电路调整状态和断轨状态下信号电流的特性以及AT供电方式下牵引回流的分布规律及特征的基础上,深入分析不平衡牵引回流对断轨检测电路干扰的机理.为了保证断轨检测电路的正常工作,从设备选型、工程设计及运营维护方面提出防护措施,并对根据抗电气化干扰原理设计的抗干扰电路进行仿真分析.结果表明:该电路接入断轨检测电路受电端后,有效地降低了进入接收设备的干扰量,使其不影响断轨结果的判定,提高了断轨检测电路的抗干扰能力.
Circuit for broken rail detection suffers from the unbalanced traction return current in the conducted interference. In order to reduce the reference of the unbalanced traction return cur rent to circuit for broken rail detection, based on analysis of characteristics of signal current of circuit for broken rail detection in normal rail and broken rail operation modes and distribution rule and characteristic of the traction re＊urn current under AT power supply, interference mecha- nism of the unbalanced traction return current to circuit for broken rail detection was deeply stud- ied. In order to guarantee the normal work of circuit for broken rail detection, some protective measures were put [orward from equipment selection, engineering design and operation mainte nance. Anti-interference circuit which was designed based on the principle of electrification inter ference was simulated and analyzed. The result shows that the circuit which is installed the re ceiving end of circuit for broken rail detection effectively reduces the interference which enters in to the receiving equipment. It makes the unbalanced traction return current not affect result of judgment of broken rail. This improves the anti-interference ability of circuit for broken rail de tection.
出处
《工程设计学报》
CSCD
北大核心
2013年第5期446-452,共7页
Chinese Journal of Engineering Design
基金
国家自然科学基金资助项目(51247002)
关键词
断轨检测电路
不平衡牵引回流
干扰
防护
circuit for broken rail detection
unbalanced traction current
interference
protection
