期刊文献+

优化方法建立钢筋混凝土梁压杆-拉杆模型 被引量:8

CONSTRUCTION OF STRUT-AND-TIE MODEL FOR REINFORCED CONCRETE BEAMS BY OPTIMAL METHOD
原文传递
导出
摘要 压杆-拉杆模型是复杂钢筋混凝土结构设计的标准方法之一,但很少扩展到浅梁的设计。钢筋混凝土梁压杆-拉杆模型的建立方法很多,但由这些方法得到的压杆-拉杆模型是否能反映结构最本质的受力状况尚无定论。该文采用寻优能力强的拓扑优化算法——遗传演化结构优化算法(GESO)来构造钢筋混凝土梁的压杆-拉杆模型,同时为了确保所得结果的最优性,采用经典的Michell准则和试验方法判断和解释GESO算法的计算结果。该文以跨高比从7变化到1的简支梁和两跨连续深受弯构件为例证明了采用GESO算法能构造满足Michell准则的钢筋混凝土梁压杆-拉杆模型,由该文总结出的钢筋混凝土梁的压杆-拉杆模型的规律有助于设计类似构件。 Strut-and-tie model method is one of the standard methods for the design of a complex reinforced structure, but it seldom extends to shallow beams. There are many ways for reinforced concrete deep beams to construct a strut-and-tie model, but the strut-and-tie models achieved are not deem to reflect the most essential mechanical state of the beams. One powerful topology optimization named genetic evolutionary structural optimization (GESO) is used to build a strut-and-tie model for reinforced concrete beams in the paper. In order to ensure the results to be optimums, the classical Michell criterion and experiments are used to judge and explain the GESO results. The examples include a series of simply supported beams with span-to-height from 7 to 1, which cover deep beams and shallow beams and two span continuous deep beams with concentrated loads and uniform loads. The examples cited prove the validity of GESO algorithm in building strut-and-tie models for reinforced concrete beams. The laws of strut-and-tie models of the examples are concluded to help the design of similar beams.
作者 刘霞 易伟建
出处 《工程力学》 EI CSCD 北大核心 2013年第9期151-157,共7页 Engineering Mechanics
基金 国家自然科学基金项目(50908082 90815002)
关键词 钢筋混凝土梁 拓扑优化 压杆-拉杆模型 Michell准则 遗传演化结构优化算法 reinforced concrete beam topology optimization strut-and-tie model Michell criterion geneticevolutionary structural optimization
  • 相关文献

参考文献19

  • 1陈廷国,杨国贤.钢筋混凝土简支深梁破坏形态的试验研究[J].大连理工大学学报,1990,30(2):185-192. 被引量:9
  • 2王田友,苏小卒.钢筋混凝土结构的拉压杆模型设计方法及现状[J].四川建筑科学研究,2004,30(3):18-20. 被引量:13
  • 3张元元,李继祥,刘建军,杨建辉.钢筋混凝土拉压杆理论研究与应用探讨[J].武汉工业学院学报,2005,24(3):72-77. 被引量:10
  • 4ACI Committee 318. Building code requirements for structural concrete and commentary (ACI 318M-05) [S]. Berkeley: Structural Building Code, 2005.
  • 5Kumar P. Optimal force transmission in reinforced concrete deep beams [J]. Computers & Structures, 1978, 8(2): 223-229.
  • 6Matteo Bruggi. Generating strut-and-tie patterns for reinforced concrete structures using topology optimization [J]. Computers & Structures, 2009, 87: 1483-1495.
  • 7Xie Y M, Steven G P. A simple evolutionary procedure for structural optimization [J]. Computers & Structures, 1993, 49(5): 885-896.
  • 8Xie Y M, Steven G P. A simple approach to structural frequency optimization [J]. Computers & Structures, 1994, 53(6): 1487- 1491.
  • 9Xie Y M, Steven G P. Evolutionary structural optimization for dynamic problems [J]. Computers & Structures, 1996, 58(6): 1067- 1073.
  • 10Liang Q Q. Performance-based optimization of structures [M]. London and New York: Spon Press, 2005, 134- 254.

二级参考文献52

共引文献114

同被引文献74

引证文献8

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部