期刊文献+

云南金鼎3000t/d锌矿SABC流程及设备选型分析 被引量:6

Analysis on SABC circuit and equipment sizing for 3000t/d zinc production line in Yunnan Jinding
原文传递
导出
摘要 云南金鼎3 000 t/d锌矿项目采用SABC磨矿流程,本文对采用该流程的半自磨机选型试验、选型方法进行回顾与分析。通过与三段破碎流程方案的对比,认为SABC流程的磨机选型结果是合理的,并分析了SABC流程后期运行需要注意的事项。 The 3 000 t/d zinc production line in Yunnan Jinding involved SABC grinding process. The paper reviewed and analyzed the sizing test and sizing method of the SAG (semi-autogenous grinding) mill operating in the line, and contrasted with three-stage crushing process, which showed that the mill sizing for the SABC circuit was reasonable. In addition, the issues needed to pay attention during the late stage of SABC circuit were analyzed.
出处 《矿山机械》 北大核心 2013年第12期1-4,共4页 Mining & Processing Equipment
关键词 SABC流程 半自磨机选型试验 半自磨机选型方法 SABC circuit sizing test of SAG mill sizing method of SAG mill
  • 相关文献

参考文献6

  • 1JKMRC.澳大利亚JKMRC研究中心的成果[EB/OL].[2012-12-25].http://www,jkmrc.uq.edu.au/Research.aspx.
  • 2Napier-Munn T J, Morrell S, Morrison R D, et al. Mineral Comminution Circuits: Their Operation and Optimisation [M]. The University of Queensland, 1996.
  • 3Morrell S, Morrison R D. Ore Charge, Ball Load and Material Flow Effects on an Energy Based SAG Mill Model [C]// Presented SAG 1989, University of British Columbia.
  • 4罗仙平,夏青,王建峰.选矿工艺数学建模现状与展望[J].四川有色金属,2004(2):48-50. 被引量:4
  • 5A.J.Lynch,马少健.选矿数学模型的建立和计算机的静态模拟—现状与发展[J].国外金属矿选矿,1993(1):14-20. 被引量:4
  • 6Khosrow Nikkhah, Corby Anderson. Role of simulation software in design and operation of metallurgical plants: A case study [C]//SME AnnualMeeting. Denver, Colorado, 2001 : 1-10.

二级参考文献7

共引文献6

同被引文献48

  • 1张光烈.湿式自磨机合理长径比的探讨[J].中国矿业,1993,2(2):48-52. 被引量:2
  • 2邵全渝.论自磨技术的进展和对策[J].国外金属矿选矿,1995,32(8):1-9. 被引量:11
  • 3邵全渝.自磨和半自磨技术的进展[J].国外金属矿选矿,2007,44(10):7-12. 被引量:19
  • 4JKSIMMET.Simulation of comminution and classification circuits-integrating all tasks within one package[EB/OL].[2016-08-09].http://www.jktech.com.au/jksimmet.
  • 5杨朝辉.中信重工SMCC将引领选矿工艺技术[EB/OL].(2013-07-26)[2016-08-09].http://css.stdaily.com/kjrb/content/2013-07/26/content_627584.htm.
  • 6TIAN J,ZHANG C,WANG C.Operation and peocessoptocess optimisation of the sino iron's ag milling circuits[C]//Vancouver:International AG/SAG Grinding Technology Conference,2015.
  • 7Yakup Umucu,Vedat Deniz,Volkan Bozkurt.The evaluation of grinding process using modsim[J].Journal of Mining and Geoengineering,2012,36(4):187-200.
  • 8JKMRC(Julius Kruttschnitt Mineral Research Centre).JKSim Met V6.0 Full Manual[R].2013:13-14.
  • 9JKMRC(Julius Kruttschnitt Mineral Research Centre).JKSim Met V5.1 Full Manual[R].2003:A142-A143.
  • 10MORRELL S,MORRISON R D.AG and SAG mill circuit selection and design by simulation[J].Vancouver:International AG/SAG Grinding Technology Conference,1996.

引证文献6

二级引证文献48

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部