摘要
The removal of phosphorus in metallurgical grade silicon （MG-Si） by water vapor carried with high purity argon was examined. The effect of the nozzle types, refining time, refining temperature, refining gas temperature and refining gas flow rate on the phosphorus removed was investigated by the self-designed gas blowing device. The optimal refining conditions are nozzle type of holes at bottom and side, refining time of 3 h, refining temperature of 1793 K, refining gas temperature of 373 K, refining gas flow rate of 2 L/min. Under these optimal conditions, the phosphorus content in MG-Si is reduced from 94×10^-6 initially to 11×10-6 （mass fraction）, which indicates that gas blowing refining is very effective to remove phosphorus in MG-Si.
通过吹高纯氩气和水蒸汽混合气体的方法除去冶金级硅中的杂质磷。采用自行设计的吹气精炼装置,研究喷嘴类型、精炼时间、精炼温度、精炼气温度、精炼气流速等因素对除磷效果的影响。研究表明:使用侧壁和底部多孔型喷嘴,精炼时间3 h,精炼温度1793 K,精炼气温度373 K,精炼气流速2 L/min作为最优吹气精炼条件时,冶金级硅熔体中的磷元素质量分数由94×10-6降低到11×10-6。表明吹气精炼是一种有效的去除冶金级硅中磷的方法。
基金
Project(51074043)supported by the National Natural Science Foundation of China
Project(2011BAE03B01)supported by the National Key Technology R&D Program of China
