期刊文献+

影响双向张弦梁结构受力性能的参数分析 被引量:5

Analysis of parameters affacting mechanical performance of bidirectional beam string structure
下载PDF
导出
摘要 为了寻求合理设计双向张弦梁的方法,考察双向张弦梁主要几何参数对结构用钢量的影响.运用基于平衡荷载态进行双向张弦梁优化设计的方法,以结构用钢量最小为优化目标,对结构的高跨比、垂跨比、两向间距比、平面长宽比以及影响预应力取值的平衡荷载值的大小5个参数进行系统深入的分析.结果表明:高跨比和垂跨比的增大对结构用钢量影响近似线性递减,两向间距比对结构用钢量影响不大,使得结构空间布置可以灵活处理,平衡荷载大小存在最优值且对结构荷载态的刚度影响很大.在设计中应首选加大结构高跨比,尽量增大垂跨比,通过计算平衡荷载值确定预应力取值. In order to seek the reasonable design method of bidirectional beam string structure, the effect of main geometric parameters on steel consumption was analized. By using the optimization design method of bidirectional beam string structure based on equilibrium load state, the minimum amount of structural steel as the optimization target, the influence to the structure optimization resulted by the high-span ratio, sag ratio, spacing ratio in two directions aspect ratio, the balancing load value and other parameters was discussed. It' s found that the high-span ratio and the sag ratio increasing lead to linear descending of steel consumption. The low influence by spacing ratio in two directions makes the structure space arrangement of ambassador can be flexibly handled. The balancing load has an optimal value and has a big effect to the structure stiffness on load state. Bidirectional beam string structure design should be preferred to increase the high-span ratio and try to increase the sag ratio. Prestress is determined by balancing load caculation.
作者 吴捷
出处 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2013年第12期121-128,共8页 Journal of Harbin Institute of Technology
基金 国家自然科学基金资助项目(51208094)
关键词 双向张弦梁 优化设计 索网形状 几何参数 平衡荷载 bidirectional beam string structure optimization cable net shape geometric parameters balancing load
  • 相关文献

参考文献8

  • 1SAITOH M,OKADA A. The role of string in hybrid string structure[J].Engineering Structures,1999,(8):756-769.
  • 2SAITOH M. A study on structural characteristic of beam string structure:prestressing for dead load[A].Tokyo:AIJ,1987.632-641.
  • 3尚仁杰,刘景亮,吴转琴,李佩勋.泊松方程与双向张弦梁找形[J].力学与实践,2007,29(5):17-20. 被引量:10
  • 4吴捷,吕志涛,舒赣平.双向张弦梁索网形状优化后的零状态找形研究[J].建筑结构,2013,43(S1):356-361. 被引量:9
  • 5CHU D N. Evolutionary structural optimization method for system with stiffness and displacement constraints[D].Melbourne:Victoria University of Technology,1997.
  • 6GIL L,ANREN A. Shape and cross-section optimization design of a truss structure[J].Comput & Structure,2001.681-689.
  • 7WANG D,ZHANG W H,JIANG J S. Truss shape optimization with multiple displacement constraints[J].{H}Computer Methods in Applied Mechanics and Engineering,2002.3597-3612.
  • 8陈汉翔,舒宣武.预应力值对张弦梁结构受力性能的影响分析[J].华南理工大学学报(自然科学版),2003,31(5):79-84. 被引量:25

二级参考文献12

共引文献41

同被引文献24

  • 1吴捷,吕志涛,舒赣平.双向张弦梁索网形状优化后的零状态找形研究[J].建筑结构,2013,43(S1):356-361. 被引量:9
  • 2张胜,甘明,范波.安福大厦双向张弦梁设计研究[J].建筑结构,2006,36(6):73-75. 被引量:10
  • 3秦杰,陈新礼,徐瑞龙,覃阳,徐亚柯,李振宝.国家体育馆双向张弦结构节点设计与试验研究[J].工业建筑,2007,37(1):12-15. 被引量:18
  • 4秦杰,徐瑞龙,覃阳,徐亚柯,高恒,李振宝.国家体育馆双向张弦结构预应力施工模型试验研究[J].工业建筑,2007,37(1):16-19. 被引量:6
  • 5吴捷.双向张弦梁结构的形状优化及静动力特性研究[D].南京:东南大学,2012.
  • 6Saitoh M.A study on structural characteristic of beam string structure:prestressing for dead load[C]//Annual Meeting Architectural Institute of Japan.Tokyo,Japan:AIJ,1987:632-641.
  • 7Saitoh M. A study on structural characteristic of beam string structure. Part III : Loading test of BSS considering boundary conditions [C]// Summaries of Technical Papers of Annual Meeting of Architectural Institute of Japan. Toyko, 1987.
  • 8秦杰.双向张弦结构及弦支穹顶结构模型试验研究[R].哈尔滨:哈尔滨工业大学,2007.
  • 9Masao Saitoh, Fumio Kuroki, Hiroshi Manki, et al. A study on structural characteristic of beam string structure.Part III: Loading test of BSS considering boundary conditions [C]. Summaries of Technical Papers of Aannual Meeting Architectural Institute of Japan, Tokyo: Architectural Institute of Japan, 1987: 1319-1320. (in Japanese).
  • 10Xue Weichen, Liu Sheng. Design optimization and experimental study on beam string structure [J]. Journal of Constructional Steel Research, 2008, 65(1): 70 - 80.

引证文献5

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部