摘要
介绍德国EJP-TOSCA公司生产的盘条抛丸机的结构、设计特点。设备主要由抛丸舱、旋转门、丸粒回收系统、空气过滤器等组成。旋转轴在电机驱动下转动,盘条在轴的带动下作同向转动,同时旋转轴外表面的螺旋突起,使得盘条在随轴转动过程中,内表面及两侧暴露在抛丸工作面内,盘条边旋转边抛丸除氧化铁皮。这种特殊设计使得大盘重盘条成功实现高速、低运行成本的整盘处理模式。应用实践表明,该盘条抛丸机能够高效去除钢丝氧化铁皮,可以完全替代酸洗。
To introduce the structure and the design concept of wire rod shot blasting machine produced by German EJP - TOSCA. The machine consists of blasting cabin, rotating door, shot recovery system, air filter etc. The motor drives the shaft to rotate, and the rotating shaft driven rod to rotate in the same direction. At the same time, the spiral bulge which is situated on the outer surface of the shaft, makes the inner surface and both sides of wire be fully exposed in shot blasting area in the rotating process of shaft. The wire is blasted while rotating. The special design succeeds in the entire volume processing mode of heavy coils. Practical application shows that the shot blasting machine is efficient equipment of scale removal, it can replace the pickling completely.
出处
《金属制品》
2014年第1期27-29,共3页
Metal Products
关键词
盘条抛丸机
氧化铁皮
电动旋转轴
酸洗
shot blasting machine for wire rod
oxide scale
electric rotating axis
pickling
