期刊文献+

CaO-5%MgO-Al_2O_3-SiO_2-0.5%‘FeO’体系低SiO_2区域熔化性能 被引量:2

Melting Performance for Selected CaO-5%MgO-Al_2O_3-SiO_2-0.5%‘FeO' Slag With Low Silica
原文传递
导出
摘要 通过半球点测试仪,对CaO-5%MgO-Al2O3-SiO2-0.5%‘FeO’体系低SiO2区域的炉渣熔化性能进行研究。结果表明:在炉渣中添加少量的SiO2可降低炉渣的熔点;当w(CaO)/w(Al2O3)较小时,炉渣的熔点随着SiO2含量的增加而降低;当w(CaO)/w(Al2O3)较大时,炉渣的熔点随着SiO2含量的增加呈现先降低后升高的趋势;随着四元碱度的增大,炉渣的熔点的总体趋势为先降低后升高。建立了熔化温度与各组分的关系,试验数据与关系式计算结果吻合较好。 The melting temperature for selected CaO-5 %MgO-Al2O3-SiO2- 0.5 %' FeO' slag with low silica was in- vestigated by the melting point testing instrument. The results indicate that the melting temperature decreases with the adding of SiO2 content. When the w(CaO)/w(Al2O3) is lower, the melting temperature decreases with the in crease of SiO2 content. When the w(CaO)/w(Al2O3) is higher, the melting temperature of slag decreases with the increase of SiO2 content and then increases. The hemisphere temperature decreases with increasing the basicity, and then increases with further the basicity increasing. The relationship between the melting temperature and the compo nent of slag can be developed, and the measured results are in good agreement with those given by the relationship.
出处 《钢铁》 CAS CSCD 北大核心 2014年第2期24-28,共5页 Iron and Steel
基金 国家自然科学基金资助项目(50874072 51204115) 江苏省基础研究计划(自然科学基金)资助项目(BK20130308)
关键词 熔化性能 SIO2含量 w(CaO) w(Al2O3) 碱度 低熔点区域 melting performance content of SiO2 w(CaO)/w(Al2O3 ) basicity low melting point area
  • 相关文献

参考文献3

二级参考文献31

共引文献54

同被引文献30

  • 1朱传运,刘承军,王德永,姜茂发.结晶器保护渣结晶温度的影响因素[J].东北大学学报(自然科学版),2004,25(10):988-990. 被引量:15
  • 2金利玲,王海涛,许中波,王福明.CaO-SiO_2-Al_2O_3-MnO系低熔点区域控制[J].北京科技大学学报,2007,29(6):574-577. 被引量:19
  • 3Suito H, Inoue R. Thermodynamics on Control of Inclusions Compositions in Ultra-Clean Steel [ J ]. ISIJ, 1996, 36 ( 5 ) : 528-536.
  • 4Turkdogan E T. Slags and fluxes for ferrous ladle metallurgy [ J]. lroumaking and Steelmaking, 1985, 12 (2) : 64-77.
  • 5Paulo C E, Remy J, Christoph W, et al. Novel fluxing agent for slags in secondary steel ladles to improve refractory life time and steel quality [ J ]. Teehnol Metal Mater Miner, 2011, 8 ( 4 ) : 285-290.
  • 6Paulo C E, Remy J, Christoph W, et al. Novel Fluxing Agents for Slags in Secondary Steel Ladies to Improve Refractory Life Time and Steel Quality [ J ]. Teehnol Metal Mater Miner, 2011, 8(4):285-290.
  • 7Kang Y B, Lee H G. Inclusions Chemistry for Mn/Si Deoxidized Steels : Thermodynamic Predictions and Experimental Confirmations [J]. ISIJ, 2004, 44(6) :1006-1015.
  • 8Mohanty U K, Behera R C. Fusion Behaviour of Synthetic Aluminothermic Ferro-chmme slags [ J]. ISIJ, 2003,43 (12) : 1875-1881.
  • 9Bale C W, Chartrand P, Degterov S A, et al. FactSage Thermo- Chemical Software and Databases [ J]. Calphad, 2002, 26 (2) : 189-228.
  • 10Eriksson G, Pelton A D. Critical Evaluation and Optimization of the Thermodynamic Properties and Phase Diagrams of the CaO- A12 03, A12 O3- SiO2, and CaO- A12 O3- SiO2 Systems [ J ]. Metal1 Mater Trans. B, 1995, 24(5) : 807-816.

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部