期刊文献+

基于运动链末端耦合与解耦的机器人协同焊接算法 被引量:5

Collaborative Welding Algorithm of Robots Based on Coupling and Decoupling of Kinematic Chain Ends
下载PDF
导出
摘要 随着焊接自动化进程的不断推进,多机器人协同焊接作业成为了焊接机器人领域的研究热点.文中基于运动链末端耦合与解耦的思想,将机器人工作站视为若干条通过关节连接而成的开式运动链的组合,通过分析各运动链末端在协同焊接过程中必须满足的通用约束,研究机器人工作站中各主/从运动链的耦合与解耦方法,进而提出了一种机器人工作站协同焊接算法.该算法以负责夹持焊件的运动链为主运动链,使焊缝离散点依次更替并调整到最佳焊接位姿,其他运动链末端跟踪当前焊缝离散点.文中还以变位双焊接机器人工作站为例,通过仿真验证了所提出的协同焊接算法的有效性. With the development of welding automation,multi-robot collaborative welding has become a research hotspot in the field of welding robots.In this paper,based on the coupling and decoupling idea of kinematic chain ends,a robot workstation is regarded as the combination of several open kinematic chains connected with joints,the general constraints that must be satisfied by the kinematic chain ends in the welding process are analyzed,and the coupling/decoupling method of master/slave kinematic chains is explored.Thus,a collaborative welding algorithm of robot workstation is proposed.In this algorithm,the kinematic chain for grasping weldments is taken as the main chain and the discrete points of welding seam are successively replaced and adjusted to the optimal welding pose, while the other kinematic chains are responsible for the tracking of current discrete points of the welding seam.Mo-reover,by taking a dual-welding robot workstation with one positioner as an example,the effectiveness of the pro-posed algorithm is verified through simulation.
出处 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2013年第11期56-61,67,共7页 Journal of South China University of Technology(Natural Science Edition)
基金 "863"计划重点项目(2009AA043901-3) 广东省战略新兴产业资助项目(2011A091101001) 广东省教育部科技部产学研结合项目(2012B090600028) 广东省科技计划项目(2012B010900076 2012B011300056)
关键词 工业机器人 协同焊接 运动链 耦合 解耦 industrial robot collaborative welding kinematic chain coupling decoupling
  • 相关文献

参考文献5

二级参考文献12

共引文献56

同被引文献19

  • 1赵娜,岳建锋,李亮玉,王天琪,郑武科.双机器人主从协调焊接的路径规划算法[J].焊接学报,2015,36(3):67-70. 被引量:7
  • 2翟敬梅,应灿,张铁,徐晓.双机器人协同焊接的轨迹优化[J].焊接学报,2015,36(1):91-95. 被引量:16
  • 3何广忠,高洪明,吴林.基于焊接位置数学模型的变位机逆运动学算法[J].机械工程学报,2006,42(6):86-91. 被引量:15
  • 4蔡自兴.机器人学[M].北京:清华大学出版社,2004.
  • 5康艳君.焊接机器人运动学规划及仿真[D].河海大学,2005.
  • 6Li Kai, Zhang Ting. Seam Tracking control system of intelligent mobile welding robot [ C 1. Proceedings of the ICINIS09 Second International Conference on Intelligent Networks and Intelligent Systems. Tianjin: IEEE,2009:269 -272.
  • 7Caccavale F. Six - DOF impedance control of dual - arm cooper- ative manipulators~ J]. IEEE/ASME Transactions on Mechatron- ics ,2012,13 (5) :576 - 586.
  • 8中国焊接协会.焊接机器人实用手册[M].北京:机械工业出版社,2014.
  • 9许勇,王义灿.阀门喷涂机器人运动学建模[J].上海交通大学学报,2015.
  • 10中国焊接协会成套设备与专用机具分会,中国机械工程学会焊接学会机器人与自动化专业委员会.焊接机器人实用手册[M].北京:机械工业出版社,2014.

引证文献5

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部