摘要
在50 L结晶罐中,通过降温结晶的方法,提纯KCl固体。采用间歇动态法,考察了搅拌转速、降温速率、搅拌器位置、晶种加入量对KCl晶体过程的粒度分布影响。实验结果表明,以上因素均会对晶体的成核、生长产生影响。操作条件控制在270 r/min、晶种量390 g、冷却水流量0.43 m3/h、搅拌器位置C/H=0.22(C,搅拌器离底高度;H,液位高度),可以得到晶体粒径分布集中、粒径较大的KCl晶体颗粒。
Pure potassium chloride was obtained from saturated solution of potassium chloride, in crystallizer of fifty litres, by means of cooling crystallization. The influences of speed of agitator, rate of cooling, impeller location and amount of crystal seed on crystal size distribution were studied. The experiment results showed that those factors had effect on nucleation and growth of crystals. Crystals of potassium chloride with concentrated distribution and larger particle size were got under the optimum conditions of stirring speed 270 r/min, seed amount 390 g, cooling water flow rate 0.43 m3/h and agitator location C/H=0.22(C, impeller off-bottom clearance;H, liquid level height).
作者
何西峰
龙湘犁
谢明辉
吴亮
周国忠
程景才
HE Yi-feng;LONG Xiang-li;XIE Ming-hui;WU Liang;ZHOU Guo-zhong;CHENG Jing-cai(State Key Laboratory of Chemical Reaction Engineering,East China University of Science and Technology,Shanghai 200237,China;Zheiiang Greatwall Mixers Co.,Ltd.,Zheiiang Wenzhou 325019,China;Institute of Process Engineering,Chinese Academy of Sciences,Beijing 100080,China)
出处
《当代化工》
CAS
2018年第12期2564-2567,共4页
Contemporary Chemical Industry
关键词
搅拌转速
降温速率
搅拌器位置
平均粒径
粒度分布
Stirring speed
Rate of temperature fall
Agitator location
Mean crystal size
Crystal size distribution
