期刊文献+

基于曲面偏置的六面体有限元网格再划分算法 被引量:3

Surface Offset-Based Remeshing Algorithm of Generating Hexahedral Elements
下载PDF
导出
摘要 根据曲面偏置理论 ,提出一种有效的六面体网格再划分方法 ,并研究了具体实现中的若干关键技术和特殊问题的处理方法 .该方法由表及里 ,逐层生成六面体单元 ,所生成的表层单元质量明显优于内部的单元 .基于提出的算法建立了六面体网格再划分原型系统 ,并给出了几个算例 .结果表明 ,所提出的算法是可靠的 ,适用于任何形状复杂的金属塑性成形过程数值模拟中的六面体网格再划分 . A new algorithm of generating the hexahedral elements was proposed. It is based on the surface offset theory, and the brick elements are generated layer by layer from outside to inside. The key methods were investigated, and some specific issues were fixed. Using this algorithm, the mesh quality in outer layers is evidently better than that at inner's. Based on this algorithm, a hexahedral element remeshing system was established, and several industrial forging processes were then simulated. The results show that the algorithm is reliable and can be further used for any complicated forging process to perform remeshing during the rigid plastic finite element method numerical simulation.
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2002年第4期449-452,共4页 Journal of Shanghai Jiaotong University
基金 航天工业总公司"九五"预研项目 ( 18.10 .96 0 810 -0 1)
关键词 数值模拟 金属成形 曲面偏置 六面体 有限元 网格再划分算法 hexahedral element remeshing surface offset numerical simulation rigid plastic finite element method
  • 相关文献

参考文献2

二级参考文献4

  • 1陈军,博士学位论文,1996年
  • 2Huang C Y,Comput Struct,1994年,2期,375页
  • 3Yang D Y,Proc Inst Mech Eng,1991年,205卷,111页
  • 4Yang D Y,Adv Technol Plast,1990年,1期,171页

共引文献2

同被引文献20

  • 1关振群,单菊林,顾元宪.基于转换模板的三维实体全六面体网格生成方法[J].计算力学学报,2005,22(1):32-37. 被引量:10
  • 2陈军,彭颖红,卫原平,阮雪榆.体积成形过程的三维刚塑性有限元模拟技术研究[J].上海交通大学学报,1996,30(9):127-132. 被引量:4
  • 3Behrens B A. Finite element analysis of die wear in hot forging processes[J]. CIRP Annals-Manufacturing Technology, 2008,57 : 305-308.
  • 4Lu C, Zhang L W ,Mm Z J, et al. 3D FEM simulation of the multi-stage forging process of a gas tur- bine compressor blade [J ]. Materials Processing Technology, 2008,198 : 463-470.
  • 5Benzley S E, Perry E. A Comparison of All-Hexahedral and All-Tetrahedral Finite Element Meshes for Elastic and Elastic-Plastic Analysis[A]. Proceedings of the 4th International Meshing Roundtable[C], 1995 : 179-191.
  • 6Su Y, Lee K H. Automatic hexahedral mesh generation for multi-domain composite models using a hybrid projective grid-based method [J]. Journal of Computer-Aided Design, 2004,36(3) : 203-215.
  • 7Zhang H M,Zhao G Q, Ma X W. Adaptive generation of hexahedral element mesh using an improved grid-based method[J]. Journal of Computer-Aided Design, 2007,39 : 914-928.
  • 8Fernandes J L M, Martins P A F. All-hexahedral remeshing for the finite element analysis of metal forming processes[J]. Journal of Finite Elements in Analysis and Design ,2007,43 : 666-679.
  • 9Fernandes J L M, Martins P A F. All-hexahedral remeshing for the finite element analysis of metal forming processes[J]. Journal of Finite Elements in Analysis and Design, 2007,43 ; 666-679.
  • 10Diez P, Calderon G. Remeshing criteria and proper error representations for goal oriented h-adaptivity [J]. Computer Methods in Applied Mechanics and Engineering, 2007,196 : 719-733.

引证文献3

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部