摘要
考察了不同甲醇流加策略对毕赤酵母高密度发酵生产水蛭素的影响。溶氧控制法不能有效地防止甲醇的过量流加。气相色谱离线检测法虽然防止了甲醇流加过量 ,但甲醇浓度的波动较大。利用甲醇传感器在线检测控制甲醇的流加可维持较恒定的甲醇浓度。在流加甲醇的同时 ,以限制性速率流加甘油可以增加表达期间的能量供应 ,提高产物的表达量。经优化后 ,采用甲醇甘油混合流加时细胞干重达到 16 2g L ,水蛭素活性达到 2 4×10 4ATU mL ,即 1 7g L。
Four different methanol feeding modes were evaluated in the hirudin producton in high-density fermentation by Pichia pastoris. It was difficult to avoid methanol excessive in the broth with the feeding strategy only based on DO level. On the other hand, the fluctuation in methanol concentration was observed with methanol feeding strategy by off-line gas chromatography. However, the stable methanol concentration was perfectly achieved by the on-line monitoring with methanol sensor. The supply of energy was improved by feeding glycerol at a limited rate as well as methanol in the induction phase. Therefore, the high cell dry weight (162g/L) and high hirudin activity (2.4×10 4ATU/mL or 1.7 g/L) was obtained in the fed-batch fermentation of recombinant Pichia pastoris by methanol-glycerol mixed feeding.
出处
《生物工程学报》
CAS
CSCD
北大核心
2002年第3期348-351,共4页
Chinese Journal of Biotechnology
