期刊文献+

异步热轧对压力容器钢组织及力学性能的影响 被引量:2

Effects of Asymmetric Hot Rolling on Microstructure and Mechanical Properties of Pressure Vessel Steel
原文传递
导出
摘要 对比研究了异步热轧对压力容器钢组织和力学性能的影响。结果表明:异步轧制材料的晶粒尺寸由表层至中心逐渐增大,表层晶粒达到1 mm;常规轧制沿厚度晶粒尺寸差别较小;常规轧制冲击试样断裂由脆性与韧性构成,而异步轧制试样断裂为韧性;异步轧制的强度及塑性优于常规轧制。 Effects of asynchronous hot rolling on the microstrueture and mechanical properties of pressure vessel steel were contrasted and investigated. The results show that, the grain size of the material rolled by asymmetric roiling increases gradually from surface to center, and the surface grain reaches 1 mm; the difference of grain size of symmetric rolling along thickness is less; the fracture of symmetric rolling impact specimen is comprised of brittle and ductile fracture, and fracture of asynchronous rolling sample is toughness; the strength and plasticity of asynchronous rolling is better than that of conventional rolling.
出处 《热加工工艺》 CSCD 北大核心 2014年第13期59-61,共3页 Hot Working Technology
关键词 异步轧制 常规轧制 微观组织 力学性能 asymmetric rolling symmetric rolling microstructure mechanical properties
  • 相关文献

参考文献8

  • 1Song R,Ponge D,Raabe D,et al. Overview of processing,mi- crostructure and mechanical properties of ultrafine grained bcc steels [J]. Materials Science and Engineering A,2006,441: 1-17.
  • 2Estrin Y,Vinogradov A. Extreme grain refinement by severe plastic deformation: a wealth of challenging science [J]. Aeta Material, 2013,61 : 782-817.
  • 3唐梦霞,吴润,杨晶晶,魏远征,谭佳梅.Ti-IF钢CSP轧制时动态再结晶模型的建立[J].热加工工艺,2013,42(23):52-54. 被引量:1
  • 4刘世锋,张耀丹,王伯健,兰菲,张武鹏.异步轧制AZ31镁合金晶粒细化对冲压性能的影响[J].热加工工艺,2012,41(7):24-26. 被引量:9
  • 5Somjeet Biswa,Dong Ik Kim,Satyam Suwas. Asymmetric and symmetric rolling of magnesium: evolution of microstructure texture and mechanical properties [J]. Materials Science and Engineering A ,2012,550:19-3 I.
  • 6Kyung Moon Lee,Hu Chul Lee. Grain refinement and me- chanical properties of asymmetrically rolled low carbon steel [J]. Journal of Materials Processing Technology,2010,210: 1574-1579.
  • 7Jie LIU,Rudolf KAWALLA.异步轧制对奥氏体钢组织和性能的影响(英文)[J].中国有色金属学会会刊:英文版,2012,22(S2):504-511. 被引量:11
  • 8Tosal L,Rodriguez C,Belzunce F Let al. Comparison of the static and dynamic fracture behavior of an AE-460 structural steel [J]. Engineering Fracture Mechanics,2000,66:537-549.

二级参考文献41

共引文献18

同被引文献9

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部