期刊文献+

二期处理对光固化复合树脂单体转化率的影响 被引量:1

Monomer conversion effect of post-cure treatment on light-cured composite resin
原文传递
导出
摘要 目的 :观察固化后二期处理对3种光固化复合树脂单体转化率的影响。方法:3种光固化复合树脂CHARISMA誖A2型、DenFilTM Flow、自制纳米羟基磷灰石复合树脂光照40 s固化后,分别给予光照5 min(B组)、140℃热处理7.5 min(C组)、132℃0.2 MPa热压处理6.5 min(D组)3种二期处理,不做任何二期处理组为对照组(A组)。利用傅立叶变换红外光谱仪,采用标准基线技术测得单体转化率,采用SPSS13.0软件包对数据进行统计学分析。结果:经二期处理的光固化复合树脂,单体转化率均有一定程度提高,140℃热处理组效果最佳,与对照组相比,差异显著(P<0.05);B、D处理组中,除DenFilTM Flow和CHARISMA誖B组与对照组相比差异无显著性外,其余与对照组相比均有显著差异(P<0.05);3种实验组中,DenFilTM Flow各组间、CHARISMA誖光照与热压组间、n-HA复合树脂光照与140℃组间相比,差异无显著性(P>0.05),其余两两相比,均差异显著(P<0.05)。结论:二期处理能提高复合树脂的单体转化率,其中,140℃热处理7.5 min效果显著,对改善复合树脂的综合性能具有一定作用。 PURPOSE: To study the influence of post-cure treatment on the monomer conversion of 3 light-cured composite resins. METHODS: Three kinds of light-cured composite resin: CHARISMA, DenFilTM Flow and nanohydroxyapatite composite resin were double-side cured for 40 s. The materials without any secondary treatment were used as control group (group A). Group B were lighted in Translux CU light cure case for 5 rain. Group C were subjected to post-cure heat treatment for 7.5 rain at 140℃ and Group D were post heated in 132℃ and pressured 0.2 MPa for 6.5 min. Degree of conversion (DC) of all the samples was measured by Fourier transform infrared spectroscopy (FTIR). The data was analyzed using SPSS 13.0 software package. RESULTS: The monomer conversion of light-cured composite resins improved at different degree after post-cure treatment, and group C was the most favorable group (P〈0.05). Compared with the control group, group B and C had significant differences (P〈0.05) except when the DenFilTM Flow and CHARISMA were lighted for 5 minutes (P〉0.05). Among the experimental groups, there was no significant difference between each group of DenFilTM Flow groups, CHARISMA illumination and hot-pressing groups, and n-HA composite resin illumination compared with 140~C groups. CONCLUSIONS: Post-cure treatment can increase the monomer conversion of light-cured composite resin so as to improve material performance, particularly for the heat treatment for 7.5 min at 140℃.
出处 《上海口腔医学》 CAS CSCD 北大核心 2014年第3期290-293,共4页 Shanghai Journal of Stomatology
基金 山东省自然科学基金(ZR2013HM044) 山东省医药卫生科技发展计划项目(2013WS0308)~~
关键词 光固化复合树脂 单体转化率 二期处理 Light-cured composite resin Monomer conversion Secondary treatment
  • 相关文献

参考文献17

  • 1Faria-E-Silva AL, Piva E, Moraes RR. Time-dependent effect of refrigeration on viscosity and conversion kinetics of dental adhesive resins [J]. Eur J Dent, 2010, 4(2): 150-155.
  • 2Heintze SD, Zellweger G, Gavallaria, et al. Influence of the antagonist material on the wear of different composites using two different wear simulation methods [J]. Dent Mater, 2006, 22(2): 166-175.
  • 3Samuelsen JT, Holme JA, Becher R, et al. HEMA reduces cell proliferation and induces apoptosis in vitro [J]. Dent Mater, 2008, 24(1): 134-137.
  • 4Ferracane JL, Greener EH. Fourier transform infrared analysis ofdegree of polymerization in unfilled resins--methods comparison [J]. J Dent Res, 1984, 63(8): 1093-1095.
  • 5Yoon TH, Lee YK, Lim BS, et al. Degree of polymerization of resin composites by different light sourees [J]. J Oral Rehabil, 2002, 29(12): 1165-1173.
  • 6Gongalves F, Kawano Y, Pfeifer C, et al. Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites [J]. Eur J Oral Sci, 2009, 117(4): 442-446.
  • 7王军,成德基,施长溪.用傅立叶变换红外光谱仪研究复合树脂的双键转化度[J].中华口腔医学杂志,1997,32(5):294-296. 被引量:4
  • 8Guiraldo RD, Consani S, Consani RL, et al. Evaluation of the light energy transmission and bottom/top rate in silorane and methacrylate-based composites with different photoactivation protocols [J]. J Contemp Dent Pract, 2011, 12(5): 361-367.
  • 9Sideridou ID, Karabela MM. Effect of the amount of 3- methacyloxypropyhrimethoxysilane coupling agent on physical properties of dental resin nanocomposites [J]. Dent Mater, 2009, 25(11): 1315-1324.
  • 10Tay FR, Loushine R J, Lambrechts P, et al. Geometric factors affecting dentin bonding in root canals: a theoretical modeling approach [J]. J Endod, 2005, 31(8): 584-589.

二级参考文献20

  • 1吕奎龙,张久兴,孟祥才,魏广治,周美龄.纳米羟基磷灰石对人工龋的影响[J].材料科学与工艺,2006,14(6):633-636. 被引量:7
  • 2许乾慰,姚畅旺,葛永静.单组分可见光固化齿科正畸粘接剂力学性能研究[J].化学推进剂与高分子材料,2007,5(2):55-59. 被引量:6
  • 3罗娟,王新知,刘学恒.纳米增韧牙科复合树脂的研究[J].临床口腔医学杂志,2007,23(7):394-396. 被引量:18
  • 4Bhatt HA, Kalita SJ. Influence of oxide-based sintering additives on densification and mechanical behavior of tricalcium phosphate (TCP)[J]. J Mater Sci Mater Med, 2007, 18(5): 883-893.
  • 5Lee JH, Um CM, Lee IB. Rheological properties of resin composites according to variations in monomer and filler composition[J]. Dent Mater, 2006, 22(6): 515-526.
  • 6Martin FE. Adhesive bonding-some clinical considerations [J]. Ann R Australas Coil Dent Surg, 2006, 18: 30-35.
  • 7Sadat-Shojai M, Atai M, Nodehi A, et al. Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: synthesis and application [J]. Dent Mater, 2010, 26(5): 471-482.
  • 8Skrtic D, Antonucci JM, Eanes ED, et al. Dental composites based on hybrid and surface-modified amorphous calcium phosphates[J]. Biomaterials, 2004, 25(7-8): 1141-1150.
  • 9Wang QS, Wang Y, Li R,et al. Effects of light-initiation agent on mechanical properties of light-cured nano-hydroxyapatite corn posite for dental restoration[J]. Appl Mech Mater, 2012, 138-139: 1012-1016.
  • 10Nikaido T, Kunzelmann KH, Chen H, et al. Evaluation of thermal cycling and mechanical loading on bonding strength of a self- etching primer system to dentin [J]. Dent Mater, 2002, 18 (3): 269-275.

共引文献8

同被引文献3

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部