期刊文献+

民用飞机机身结构快速设计及自动化调整 被引量:4

Rapid structure design and automated adjustment of civil aircraft fuselage
原文传递
导出
摘要 为了在飞机设计前期对结构进行较详细的考虑,满足在设计前期进行以强度为约束的重量特性评估、方案评估等方面的需求,研究了民用飞机机身结构快速设计、建模以及模型自动化调整的方法,并运用该方法在一个开放式飞机总体设计环境中开发实现了此功能.定义了飞机机身坐标系,提出了机身各类结构件的参数化描述及构建模型的方法,建立了交互式机身结构设计环境,可自动获取结构的体积、重量和惯性矩等信息.在此基础上实现了模型自动化调整和重量特性的同步更新,为总体设计阶段进行飞机重量、气动和结构的多学科设计优化奠定了基础.最后,用设计实例验证了该方法的有效性. To improve the quality and efficiency of civil aircraft design,it would be better to take structure design into account earlier,instead of beginning structure design in later preliminary design phase or detail design phase. A method to implement fuselage structure rapid design,modeling,and automated adjustment for civil aircraft was studied. The parametric modeling method of fuselage structure was represented,and a functionality of rapid fuselage structure design for civil aircraft,which can obtain the characteristics including mass,centre of gravity and inertia,was developed in an open aircraft conceptual /preliminary design system. In addition,the automatic adjustment of fuselage structure model and automatic update of mass property data were implemented,which contribute to multidisciplinary optimization work. An instance was presented to illustrate that this implementation method is feasible and effective.
出处 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2014年第6期782-787,共6页 Journal of Beijing University of Aeronautics and Astronautics
基金 工业和信息化部"民用飞机总体设计支撑软件"基金资助项目
关键词 飞机总体设计 机身结构 参数化建模 自动调整 结构快速设计 aircraft conceptual /preliminary design fuselage structure parametric modeling automated adjustment rapid structure design
  • 相关文献

参考文献16

  • 1顾诵芬.飞机总体设计[M].北京:北京航空航天大学出版社,2003..
  • 2Raymer D P. Aircraft design:a conceptual approach[M].3rd ed.Reston:AIAA Inc,1999.
  • 3Roskam J. Airplane design[M].Kansas:Roskam Aviation and Engineering Corporation,1985.
  • 4Kundu A. Aircraft design[M].Cambridge:Cambridge University Press,2010.
  • 5罗明强,冯昊成,刘虎,武哲.民用飞机机翼结构快速设计及自动化调整[J].北京航空航天大学学报,2009,35(4):468-471. 被引量:15
  • 6《飞机设计手册》总编委会.飞机设计手册第5册:民用飞机总体设计[M].北京:航空工业出版社,2005.
  • 7Neufeld D, Chung J.Development of aircraft conceptual design optimization software[C]//International Conference on Computational Science and Its Applications.Piscataway,NJ:IEEE Computer Society,2007:313-317.
  • 8Leifsson L T. Multidisciplinary design optimization of low-noise transport aircraft[D].Virginia:Virginia Polytechnic Institute and State University,2006.
  • 9Roskam J, Anemaat W A.General aviation aircraft design methodology in a PC environment[R].AIAA-1996-5520,1996.
  • 10唐家鹏,席平,胡毕富,许进峰.知识驱动飞机翼面结构快速设计[J].北京航空航天大学学报,2013,39(6):808-812. 被引量:10

二级参考文献55

  • 1祁加强,谷良贤,高原.基于CATIA的导弹参数化模型驱动技术研究[J].科学技术与工程,2007,7(10):2346-2349. 被引量:11
  • 2Leifsson L T. Multidisciplinary design optimization of low-noise transport aircraft [ D]. Virginia: Department of Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State Uni versity, 2006
  • 3Wagner T, Valasek J. Comparison of computational methods for stability and control analysis[ R]. AIAA Paper 2005-140, 2005
  • 4Fidanci M, Miller J R, Strauss D J. Integrating automated multi- disciplinary optimization in preliminary design of non-traditlonal aircraft[ R]. ADA380252, 2000
  • 5Roskam J, Anemaat W A. General aviation aircraft design methodology in a PC environment[ R]. AIAA Paper 96-5520, 1996
  • 6Raymer D P. Aircraft design : a conceptual approach [ M ]. 3rd edition. Reston: AIAA Inc, 1999
  • 7Wagner T, Valasek J. Comparison of computational methods for stability and control analysis [R]. AIAA- 2005-140, 2005.
  • 8Griffiths R C, Visser K D. Panel code estimates of wind tunnel wall and support interference effects on the HSCT [R]. AIAA-2000-4020, 2000.
  • 9Knapp M, Lednicer D. MGAERO validation using KC 135 flight and tunnel data[R]. AIAA-2000-4021. 2000.
  • 10Abanto J, Pelletier D,Garon A,et al. Verification of some commercial CFD codes on atypical CFD problems [R].AIAA-2005-682, 2005.

共引文献32

同被引文献34

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部