期刊文献+

DD499单晶合金拉伸性能薄壁效应 被引量:5

Influence of Thin Wall on the Tensile Properties of DD499 Single Crystal Superalloy
下载PDF
导出
摘要 本文系统研究了壁厚对拉伸曲线形态、拉伸强度以及断裂特性的影响。在所测试温度范围内,壁厚对拉伸曲线形态、拉伸强度和断裂特性都有明显的影响;相对而言,760℃拉伸性能薄壁效应更加明显,但壁厚和拉伸塑性间没有明显的函数关系。在760℃标准试样断口表面存在多个滑移系同时启动产生的波纹状滑移特征;而不同壁厚试样尽管也表现出滑移开裂特征,但滑移系单一。在900℃标准试样断口表面存在大量等轴韧窝,表现出延性断裂的特征;而不同壁厚试样的断口表现出混合断裂特征。 Influence of thin wall on tensile curves, tensile properties and the fracture character of DD499 single crystal superalloy were investigated in this paper. In the test temperature range, the thickness wall has significant effect on tensile curves, tensile strength and fracture character. Comparatively, tensile properties at 760 ℃ display greater thin wall effect. There is an ambiguous function relationship between thickness and tensile ductility. At 760 ℃, slip crack is the common fracture character of the specimen for different thickness and standard one. But the standard specimen exhibits start-up of multiple slip systems and the specimen with different thickness only operates single slip system. At 900℃, the standard one shows ductile crack with lots of equiaxial dimples, the fracture surface with different thickness represents mixed failure character.
出处 《铸造》 CAS CSCD 北大核心 2014年第8期781-787,共7页 Foundry
基金 国家基础研究项目(973项目:2010CB631200 2010CB631206) 国家自然科学基金(50931004 51001103)
关键词 单晶合金 拉伸性能 薄壁效应 single crystal superalloy tensile properties thin wall effect
  • 相关文献

参考文献4

  • 1Koff B L. Gas turbine technology evolution: a designer perspective [J]. J. Propul. Power, 2004 (20) : 577-595:.
  • 2Doner M, Heckler J A. Effects of section thickness and orientation on creep-rupture properties of two advanced single crystal alloys [EB/OL]. SAE Technical Paper #851785, Society of Automotive Eng,.
  • 3Soeehting F. Thin wall debit [M]. Internal Memo Pratt & Whitney. East Hartford, CT, 1982.
  • 4余昌奎,于金江,仉凤江,石峰,孙晓峰.DD499单晶合金持久性能薄壁效应[J].铸造,2014,63(5):479-483. 被引量:7

二级参考文献11

  • 1Bensch M,PreuBer J,Hü ttner R. Modeling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5[J].Acta Materialia,2010.1607-1617.
  • 2Kofstad P. Defects and transport properties of metal oxides[J].Oxidation of Metals,1995,(1/2):3-27.
  • 3Bettridge D F,Ubank R G. Quality control of high temperature protective coatings[J].Mater Sci Technol,1986.232-242.
  • 4Doner M,Heckler J A. Effects of section thickness and orientation on creep rupture properties of two advanced single crystal alloys[A].Warrendale,1985.
  • 5Doner M,Heckler J A. Identification of mechanisms responsible fordegradation in thin-wall stress rupture properties[A].Warrendale:TMS,1988.653-662.
  • 6Seetharaman,Green K A,Harada H. Thickness debit in creep properties of PWA 1484[A].2004.207-214.
  • 7Hü ttner R,J Gabel,Glatzel U. First creep results on thin-walled single-crystal superalloys[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009.307-311.
  • 8Yu Jinjiang,Sun Xiaofeng,jin tao. High temperature creep and low cycle fatigue of a nickel-base superalloy[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2010,(09):2379-2389.
  • 9Yu Jinjiang,Sun Xiaofeng,Zhao Nairen. Effect of carbon on microstructure and mechanical properties of DD99 single crystal superalloy[J].T Nonferr Metal Soc China,2006,(special 3):s1973-s1977.
  • 10Han Guoming,Yu Jinjiang,Sun Yuelai. Anisotropic stress rupture properties of the nickel-base single crystal superalloy SRR99[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2010.5383-5390.

共引文献6

同被引文献52

引证文献5

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部