期刊文献+

驻波管中声学材料隔声性能的修正计算方法 被引量:3

Algorithm for Modification of Measurement Data for Sound Transmission Loss of Acoustical Materials in Standing-wave Pipes
下载PDF
导出
摘要 用驻波管四传声器法,分析了透射管中多次透射反射波对隔声量测试结果的影响,在考虑所有多次透射反射波的因素后推导了修正计算公式。通过对不同样品的测试,比较了考虑所有透射反射波的修正方法与仅考虑第一次透射反射波的修正方法的区别。实验结果表明:采用吸声性能优良的透射管声学末端,考虑一次透射反射波的修正方法可以得到正确的测量结果;而如果采用吸声性能较差的透射管声学末端,则应该考虑到所有高次透射反射波的影响。 Based on the four-microphone method of the standing-wave pipe,the effect of the multi- transmitted-andreflected waves in the transmission pipe on the sound transmission performance is discussed.The modification formula associated with the multi-transmitted-and-reflected waves is derived.By measuring several samples in the standing-wave pipe,the difference between the overall multi- transmitted-and-reflected modification and only the first transmitted-reflected modification is compared.Experimental results show that if the sound absorption performance of the acoustical terminal is perfect,the first transmitted-reflected modification is good enough to obtain the accurate sound transmission loss;while the sound absorption performance of the terminal is not perfect as the expected,the overall multi- transmitted- reflected modification should be taken into account.
出处 《噪声与振动控制》 CSCD 2014年第4期115-118,共4页 Noise and Vibration Control
基金 国家自然科学基金(11304050 51365007) 高等学校博士学科点专项科研基金新教师类课题(20135201120007) 上海交通大学机械系统与振动国家重点实验室开放课题(MSV-2013-01) 上海交通大学舰船设备噪声与振动控制技术重点学科实验室开放课题(VSN201301)
关键词 声学 驻波管 声学材料 隔声性能 修正方法 acoustics standing-wave pipe acoustical material sound transmission loss modification method
  • 相关文献

参考文献7

  • 1ISO 10534- 1- 1996, Acoustics-determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio [S].
  • 2ISO 10534- 2- 1998, Acoustics- determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method [S].
  • 3Song B. H, Bolton J. S. A transfer matrix approach for estimating the characteristic impedance and wave numbers of limp and rigid porous materials[J]. J. Aeoust. Soe. Am., 2000, 107: 1131-1152.
  • 4曲波,朱蓓丽.驻波管中隔声量的四传感器测量法[J].噪声与振动控制,2002,22(6):44-46. 被引量:50
  • 5Seybert A. F, Ross D. F. Experimental determination of acoustic properties using a two-microphone random excitation technique[J]. J. Acoust Soc. Am., 1977, 61(5): 1362-70.
  • 6朱蓓丽,罗晓辉.驻波管中的隔声量测试方法[J].噪声与振动控制,2000,20(6):41-43. 被引量:28
  • 7彭东立,胡碰,朱蓓丽.驻波管中介质板复透射系数的修正计算方法[J].上海交通大学学报,2007,41(4):649-653. 被引量:6

二级参考文献15

  • 1朱蓓丽,肖今新.双水听器传递函数法低频测试及误差分析[J].声学学报,1994,19(5):351-360. 被引量:34
  • 2沈Hao.声学测量[M].科学出版社,1986..
  • 3冯Yu正.轻结构隔声原理与应用技术[M].科学出版社,1987..
  • 4冯王禹正,轻结构隔声原理与应用技术,1987年
  • 5沈山豪,声学测量,1986年
  • 6ISO 10534-1-1996,Acoustics-Determination of sound absorption coefficient and impedance in impedance tubes.Part 1:Method using standing wave ratio[S].
  • 7ISO 10534-2-1998,Acoustics-Determination of sound absorption coefficient and impedance in impedance tubes.Part 2:Transfer-function method[S].
  • 8Bolton J S,Yun R J,Pope J.Development of a new sound transmission test for automotive sealant materials[J].SAE Trans,1997,106:2651-2658.
  • 9ASTM Standard E 1050-90,Impendance and absorption of acoustical materials using a tube,two microphones,and a digital frequency analysis system[S].
  • 10Song B H,Bolton J S.A transfer-matrix approach for estimating the characteristic impedance and wave numbers of limp and rigid porous materials[J].J Acoust Soc Am,2000,107(3):1131-1152.

共引文献63

同被引文献20

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部