摘要
为满足轴流泵叶片的水力和结构性能,对轴流泵叶片采用基于i S I G H T的多学科设计优化。在确立叶栅稠密度及其沿展向变化规律、轮毂比和厚度比作为设计变量的基础上,建立了轴流泵叶片多学科协同优化模型,提出了协同优化算法在轴流泵叶片多学科设计优化过程中的改进方法,系统级采用约束松弛法,子系统级采用响应面法。经实例运行,证实了基于约束松弛的协同优化算法能够很好地解决轴流泵泵叶片设计中2个学科的耦合以及数据量大和数据关系复杂的问题。同时约束松弛法的引入又使得协同优化的计算收敛更快,可靠性更高。通过模型泵试验证实了多学科设计优化提高了轴流泵叶片的综合性能,可有效兼顾高效、轻量化的要求。
In this thesis, collaborative optimization algorithm is applied to the multidisciplinary design optimization of axial-flow pump blades. Collaborative optimization algorithm being a kind of multidisciplinary design optimization has developed rapidly in recent years, and is popular among experts at home and abroad because of its special advantages. First, the main design variables which influence the hydraulic performance and structural strength simultaneously were referred to. Besides, the thesis described collaborative optimization algorithm that is used for complex engineering systems to optimize the design. The computing framework of collaborative optimization algorithm could also be found in this thesis. Moreover, the advantages and disadvantages of the collaborative optimization algorithm were also analyzed. In the part of the system-level mathematical model of collaborative optimization, the surface response method and constraint relaxing method were introduced, which changed equality constraint into inequality constraints. Because the constraint relaxing method needs less calculation and leads to higher rate of convergence, the thesis adopted the collaborative optimization algorithm. Then, the mathematical model for the axial-flow pump blades was set up with collaborative optimization algorithm. The system-level optimization model adopted multidisciplinary and multi-objective optimization method, i.e. the two disciplines-the hydraulic performance and structure-were expressed as an objective function of the system in the form of a linear combination. The subsystem optimization model should suffice the requirements of cavitations performance, cascade diffusion coefficient, and blades stresses. In the end, based on the iSIGHT optimization platform, hydraulic performance and structure were coordinated and optimized collaboratively. By a series of computational analyses, the model of axial-flow pump blades were exported and then tested. The experimental results show that axial-flow pump blades which are designed by this algorithm have a good comprehensive performance. In consequence, the case of the design optimization of axial-flow pump blades indicates that the convergence of the collaborative optimization algorithm based on constraint relaxing method is reliable, and solved the problem that coupling multiple disciplines would have large volumes and complex data. At the same time, it verified the feasibility of a multi-disciplinary design optimization in the pump blade design optimization field. As to an axial-flow pump, collaborative optimization algorithm does produce a better-optimized design scheme, improve the overall performance of axial-flow pump blades, and extend the range of application of the axial-flow pump blades. Meanwhile, this algorithm avoids controlling the related indexes by virtue of mere experience when the design optimization is considered in a single discipline. Therefore, the collaborative optimization algorithm for axial flow-pump blades of multidisciplinary design optimization is efficient and feasible.
出处
《农业工程学报》
EI
CAS
CSCD
北大核心
2014年第17期93-100,共8页
Transactions of the Chinese Society of Agricultural Engineering
基金
国家自然科学基金项目(51376155)
"十二五"农村领域科技计划项目(2012BAD08B03-2)
江苏省高校自然科学研究重大项目(11KJA570001)
江苏省普通高校研究生科研资助项目(CXLX13_904)
关键词
轴流泵
叶片
优化
约束松弛法
多学科设计
协同算法
axial flow turbomachinery
turbomachine blades
optimization
constraint relaxation method
multidisciplinary design
collaborative algorithm
