期刊文献+

Viscoelastic Characteristics of Asphalt Binders at Softening Point Temperature 被引量:1

Viscoelastic Characteristics of Asphalt Binders at Softening Point Temperature
下载PDF
导出
摘要 In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using a dynamic shear rheometer(DSR). The softening points and the rheological parameters of the asphalt samples were measured and analyzed. The results indicated that at the softening point temperature the neat asphalt and the SBS modified asphalt showed two different rheological states. The neat asphalt binders had a majority of viscous components in viscoelastic composition, with the phase angles being mostly higher than 80 o. The SBS modified binders had lower phase angles, with their elasticity still retained. Meanwhile, the Shapiro-Wilk normality test showed that at a confidence level of 0.05, at whatever aging state, the neat asphalt had a stable complex modulus corresponding to the softening point, which was 13.034 kPa at a standard deviation of 2.105 kPa under the same test condition. The softening point of neat asphalt binder can be calculated via the equivalent modulus rule. It is found out that there is a good relationship between the calculated and the measured softening points. And it is suggested that more data are needed to validate this finding. In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, morethan 30 different asphalt binders were selected and tested by dynamic rheological scan method using a dynamic shear rheometer(DSR). The softening points and the rheological parameters of the asphalt samples were measured and analyzed.The results indicated that at the softening point temperature the neat asphalt and the SBS modified asphalt showed two differentrheological states. The neat asphalt binders had a majority of viscous components in viscoelastic composition, withthe phase angles being mostly higher than 80o. The SBS modified binders had lower phase angles, with their elasticity stillretained. Meanwhile, the Shapiro-Wilk normality test showed that at a confidence level of 0.05, at whatever aging state, theneat asphalt had a stable complex modulus corresponding to the softening point, which was 13.034 kPa at a standard deviationof 2.105 kPa under the same test condition. The softening point of neat asphalt binder can be calculated via the equivalentmodulus rule. It is found out that there is a good relationship between the calculated and the measured softening points.And it is suggested that more data are needed to validate this finding.
出处 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2014年第3期19-25,共7页 中国炼油与石油化工(英文版)
基金 financially supported by the Shandong Natural Science Foundation (ZR2009FL020) the Shandong Transportation Innovation Foundation (2010Y20)
关键词 asphalt binder softening point VISCOELASTICITY equivalent modulus temperature 沥青结合料 粘合剂 粘弹特性 温度 动态剪切流变仪 SBS改性沥青 复合弹性模量 老化状态
  • 相关文献

参考文献5

二级参考文献40

共引文献106

同被引文献10

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部