7D Harrod, R Gold, and R. Jacko. Alloy Optimization for PWR Steam Generator Heat-transfer Tubing [J]. JOM Journal of the Minerals, Metals and Materials Society, 2001, 53(7): 14-17.
8Stallwag B. The Mechanism of Oxide Film Formation on Austenitic Stainless Steels in High Temperature Water [J]. Corrosion Science, 1998, 40(2/3): 337-370.
9Stephen E. Zienmiak, Michael Hanson. Corrosion Behavior of NiCrFe Alloy 600 in High Temperature, Hydrogenated Water [J]. Corrosion Science, 2006, 48: 498-521.
10Takumi TERACHI, Katsuhiko FUJII, Koji ARIOKA. Microstructural Characterization of SCC Crack Tip and Oxide Film for SUS316 Stainless Steel in Simulated PWR Primary Water at 320℃[J]. Journal of NUCLEAR SCIENCE and TECHNOLOGY, 2005, 42(2): 225-232.
6International Atomic Energy Agency. Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety: Steam Generators, IAEA-TECDOC-981 [R]. Vienna: IAEA, 1997.
7International Atomic Energy Agency. Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety Primary Piping in PWRs, IAEA-TECDOC-1361 [R]. Vienna: IAEA, 2003.
8Nuclear Regulatory Commission. Investigation and Evaluation of Stress Corrosion Cracking in Piping of Light Water Reactor Plants, NUREG-0531 [R]. Washington, DC: U.S. NRC, 1979.
9International Atomic Energy Agency. Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety: BWR Pressure Vessels, IAEA-TECDOC-1470 JR]. Vienna: IAEA, 2005.
10International Atomic Energy Agency. Stress Corrosion Cracking in Light Water Reactors: Good Practices and Lessons Learned, NP-T- 3.13 [R]. Vienna: IAEA, 2011.
