期刊文献+

A two-dimensional analytical model for channel potential and threshold voltage of short channel dual material gate lightly doped drain MOSFET 被引量:1

A two-dimensional analytical model for channel potential and threshold voltage of short channel dual material gate lightly doped drain MOSFET
原文传递
导出
摘要 An analytical model for the channel potential and the threshold voltage of the short channel dual-material-gate lightly doped drain (DMG-LDD) metal-oxide-semiconductor field-effect transistor (MOSFET) is presented using the parabolic approximation method. The proposed model takes into account the effects of the LDD region length, the LDD region doping, the lengths of the gate materials and their respective work functions, along with all the major geometrical parameters of the MOSFET. The impact of the LDD region length, the LDD region doping, and the channel length on the channel potential is studied in detail. Furthermore, the threshold voltage of the device is calculated using the minimum middle channel potential, and the result obtained is compared with the DMG MOSFET threshold voltage to show the improvement in the threshold voltage roll-off. It is shown that the DMG-LDD MOSFET structure alleviates the problem of short channel effects (SCEs) and the drain induced barrier lowering (DIBL) more efficiently. The proposed model is verified by comparing the theoretical results with the simulated data obtained by using the commercially available ATLASTM 2D device simulator. An analytical model for the channel potential and the threshold voltage of the short channel dual-material-gate lightly doped drain (DMG-LDD) metal-oxide-semiconductor field-effect transistor (MOSFET) is presented using the parabolic approximation method. The proposed model takes into account the effects of the LDD region length, the LDD region doping, the lengths of the gate materials and their respective work functions, along with all the major geometrical parameters of the MOSFET. The impact of the LDD region length, the LDD region doping, and the channel length on the channel potential is studied in detail. Furthermore, the threshold voltage of the device is calculated using the minimum middle channel potential, and the result obtained is compared with the DMG MOSFET threshold voltage to show the improvement in the threshold voltage roll-off. It is shown that the DMG-LDD MOSFET structure alleviates the problem of short channel effects (SCEs) and the drain induced barrier lowering (DIBL) more efficiently. The proposed model is verified by comparing the theoretical results with the simulated data obtained by using the commercially available ATLASTM 2D device simulator.
出处 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第11期620-625,共6页 中国物理B(英文版)
关键词 dual-material-gate MOSFET lightly doped drain short channel effect threshold voltage dual-material-gate MOSFET, lightly doped drain, short channel effect, threshold voltage
  • 相关文献

参考文献24

  • 1Wong H and Iwai H 2005 Phys. World 18 40.
  • 2Wong H and Iwai H 2006 Microelectronics Engineering 83 1867.
  • 3Wong H 2012 Nano-CMOS Gate Dielectric Engineering (New York: CRC Press) pp. 1-6.
  • 4Iwai H 2008 Proceedings of the 8th International Workshop Junction Technology, May 15-16, 2008 Shanghai, China, p. 1.
  • 5Maiti C K and Maiti T K 2013 Strain-Engineered MOSFETs (New York: CRC Press) pp. 1-7.
  • 6Maiti T K 2009 Process-Induced Stress Engineering in Silicon CMOS Technology (Ph. D. Dissertation) (West Bengal: Jadavpur University).
  • 7Pradhan K P, Mohapatra S K, Agarwal P K, Sahu P K, Behera D K and Mishra Jyotismita 2013 Microelectronics and Solid State Electronics 2 1.
  • 8Long W and Chin K K 1997 Technical Digest International Electron Devices Meeting 549.
  • 9Kumar M J, Orouji A A and Dhakad H 2006 IEEE Trans. Electron Deviees 53 920.
  • 10Dao-Ming K, Qi L, Jun-Ning C, Shan G and Lei L 2006 8m th International Conference on Solid State and Integrated Circuit Technology, October 23-26, 2006, Shanghai, China.

同被引文献1

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部