期刊文献+

磨削液射流特性仿真分析与实验研究 被引量:1

Simulation Analysis and Experimental Research on Grinding Fluid Jet
下载PDF
导出
摘要 磨削加工过程中的磨削液与空气形成的两相流对磨削液的利用效果影响较大。研究和分析磨削液与空气在磨削区相互作用机理,对于合理设计供液参数、提高磨削液利用率及降低磨削液对环境的影响具有重要的工程意义。在研究VOF方法基础上,对磨削区气液两相流进行仿真,获得磨削液在不同喷嘴位置和最小间隙的条件下向磨削区射流时体积分数分布特征。通过磨削实验,研究磨削供液参数对工件表面完整性的影响机制,并验证仿真实验结果。 The two-phase flow, formed by grinding fluid and air, has great effect on grinding process in grinding zone. Therefore, it is engineering signification to study and analyze the mechanism of grinding fluid and air interaction, for reasonably designing parameters o fluid supply system, improving the utilization and reducing the environmental impact of grinding)quid. Based on VOF method, the air and)quid two-phase flow is simulated, as well as the grinding fluid volume fraction distribution is obtained under different nozzle positions and minimum gap conditions. Through the experiments of grinding, the influencing mechanisms of grinding fluid parameters to the surface integrity are studied, and the simulation results are verified.
出处 《机械设计与制造》 北大核心 2014年第11期216-219,共4页 Machinery Design & Manufacture
基金 国家自然科学基金资助项目(51375083)
关键词 磨削液 气液两相流 VOF方法 射流 仿真 供液参数 Grinding Fluid Air and Fluid Two Phase Flow VOF Jet Simulation Parameters
  • 相关文献

参考文献7

  • 1Simul Banerjee,Sujit Ghosal,Tanmay Dutta.Development of a simple technique for improving the efficacy of fluid flow through the grinding zone[J].Journal of Materials Processing Tec,2007,197(1):306-313.
  • 2姜昂,孟凡博,修世超,罗继曼.磨削过程中磨削液的有效利用及其实现技术[J].机械设计与制造,2012(5):30-32. 被引量:10
  • 3修世超,蔡光起.快速点磨削周边磨削层模型及参数[J].机械工程学报,2006,42(11):197-201. 被引量:19
  • 4霍文国,徐九华,傅玉灿,戚厚军.绿色磨削加工技术研究现状及进展[J].工具技术,2011,45(9):3-6. 被引量:12
  • 5Eduardo Garcia,Iigo Pombo,Jose Antonio Sanchez.Reduction of oil and gas consumption in grinding technology using high pour-point lubricants[J].Journal of Cleaner Production,2013(6):99-108.
  • 6Schumach MR,Chung Jin-Bok,Schultz WW.Analysis of fluid flow under a grinding wheel[J].Journal of Engineering for Industry,1991(1):190-197.
  • 7Ebbre llS,Woolley NH,Tridimas YD.The effects of cutting fluid application methods on the grinding process[J].International Journal of Machine Tools and Manufacture,1999,40(2):209-223.

二级参考文献47

共引文献37

同被引文献11

  • 1袁训华,何明奕,王胜民,赵霞,赵晓军.热镀锌渣的形成原因及回收工艺[J].云南冶金,2007,36(1):32-35. 被引量:14
  • 2Chen Li-lin.The Production of hot dip galvanized steel zinc slag forming and processing technology practice[J].Science&Technology Information,2009(21):98-99.
  • 3E.Vahidi,F.Rashchi,,D.Moradkhani.Recovery of zinc from an industrial zinc leach residue by solvent extractionusing D2EHPA[J].Minerals Engineering,2009(22):204-206.
  • 4王鲁,张春青,施伟君.一种用于连续热镀锌生产的锌渣去除装置:中国,200920067758.1[P].2009.02.17.
  • 5Wang Lu,Zhang Chun-qing,Shi Wei-jun.A Zinc Slag Removal Device Used in Continuous Hot Galvanizing Production:China,200920067758.1[P].2009.02.17.
  • 6马根娣,孙鸿元.气液二相流研究概述[J].力学进展,1986(1):65-73.
  • 7Ma Gen-di,Sun Hong-yuan.Research overview of gas-liquid two phaseflow[J].Advances in Mechanics,1986(1):65-73.
  • 8Taha Taha,Z.F.Cui.CFD modellingof slug flow in vertical tubes[J].Chemical Engineering Science,2006(61):676-687.
  • 9陈礼林.热浸镀锌钢板生产中锌渣的形成及处理的工艺实践[J].科技资讯,2009,7(21):98-99. 被引量:2
  • 10徐勇.镀铝锌机组底渣的清除与控制[J].梅山科技,2012(4):14-17. 被引量:2

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部