期刊文献+

烧结工艺参数对混合矿黏结相强度的影响 被引量:3

Influence of Sintering Parameters on Binding Phase Strength of Mixed Iron Ore
原文传递
导出
摘要 采用微型烧结设备研究了烧结温度、碱度和Mg O含量对高褐铁矿配比混合矿黏结相强度的影响,结果表明:随着烧结温度、碱度、Mg O含量的增加,黏结相强度先升高后降低,当烧结温度为1 280℃、碱度为1.6、Mg O质量分数为2.0%时,高褐铁矿配比混合矿的黏结相强度最高。生产中应适当降低褐铁矿的配比,保证混合铁矿粉具有足够的黏结相强度。 The binding phase strength of mixed iron ore with high limonite ratio was determined by micro-sintering appa-ratus at different sintering temperature, basicity and MgO content. The results reveal that, binding phase strength of mixed iron ore increased at first and then decreased as sintering temperature, basicity and MgO content increased. It reached the highest value when the sintering temperature was 1 280℃, alkalinity was 1.6 and mass percent of MgO was 2.0%. Limo-nite ratio should be reduced appropriately in production, so that the mixed iron ore has adequate binding phase strength.
出处 《钢铁》 CAS CSCD 北大核心 2014年第12期24-27,共4页 Iron and Steel
基金 河北省自然科学基金--钢铁联合基金资助项目(E2012209014)
关键词 混合铁矿粉 褐铁矿比例 黏结相强度 烧结温度 碱度 MGO含量 mixed iron ore limonite ratio the binding phase strength sintering temperature basicity MgO content
  • 相关文献

参考文献13

二级参考文献57

共引文献329

同被引文献59

引证文献3

二级引证文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部