期刊文献+

基于超声导波的贮箱绝热层脱粘检测试验 被引量:1

An Experimental Study on Disbond Detection in a Thermal Insulation System Using Guided Waves
下载PDF
导出
摘要 研究使用超声导波对绝热层脱粘损伤进行检测的可行性。在铝板上采用环氧树脂粘接片状结构聚酰亚胺泡沫模拟绝热结构。通过在铝板上布置一对可变角度的楔形探头,改变入射角度和激励信号中心频率产生适当的导波模态,采用Pitch—catch方式研究不同扫描路径上的超声导波在贴片结构上的传播特性变化。实验结果表明绝热层泡沫吸收了超声导波大部分能量,采用超声导波可定性地检测绝热结构的脱粘状况,包括脱粘位置和大小。 The feasibility of ultrasonic guided waves for disbond detection of thermal insulation system is conducted. Some polyimide foams are bonded on an aluminum plate using epoxy adhesive to simulate thermal insulation system. Two variable angle probes are located on the two edges of the plate. The appropriate mode of guided wave is generated by changing the incidence angle and the center frequency of the excitation signal. The pitch-catch mode is used to study the propagation characteristics of guided wave on different scanning path. Experimental results show that the foam insulation layer absorbs most of the energy of ultrasonic guided waves, and the ultrasonic guided waves can be used to qualitatively detect disbond defect between the foam and the substrate, including the disbond location and size.
出处 《宇航材料工艺》 CAS CSCD 北大核心 2014年第A01期75-78,共4页 Aerospace Materials & Technology
基金 自然科学基金项目(51475067,11172053)
关键词 绝热层 超声导波 损伤检测 脱粘缺陷 完整性监测 Thermal insulation system, Guided wave, Damage detection, Disbond defect, Integrity monitoring
  • 相关文献

参考文献8

  • 1Margarita Krisson Roland Graue, Matthias Erdmann, Amd Reutlinger. Integlated health monitoring approach for reus- able cryogenic tank structures [ J ]. Journal of Spacecraft and Rockets, 2000, 37(5):580-585.
  • 2Raghavan A, Cesnik C E S. Review of guided wave structural health monitoring[ J ], The Shock and Vibration Digest, 2007,39(2) :23-30.
  • 3艾春安,王乔,李剑,徐志高.基于导波能量泄漏的SRM复合材料壳体脱粘缺陷定量检测方法[J].无损探伤,2013,37(4):12-15. 被引量:1
  • 4Kundu T, Reibel R, Jata K V. Fundamental ultrasonic wave propagation studies in a model thermal protection system [J]. Proc. of SPIE on Health Monitoring and Smart Nondestruc- tive Evaluation of Structural and Biological Systems V, 2006, 6177:1-10.
  • 5Kundu T, Das S, ata K V. Health monitoring of a ther- mal protection system using Lamb waves [ J ]. Structural Health Monitoring, 2009,8 ( 1 ) :29-45.
  • 6Luo H, Hanagud S. Detection of debondings in thermal protective system tiles by using nonlinear structural dynamic re- sponse[ R]. AIAA/ASME/ASCE/AHS/ASC Structures, Struc- tural Dynamics, and Materials Conference and Exhibit. Long Beach, AIAA- 1998-1924.
  • 7Engberg R, Ooi T. Methods and piezoelectric imbedded sensors for damage detection in composite plates under ambient and cryogenic condition [ C ]. Proc. SPIE on Smart Struct. Ma- ter. , 2004:80-88.
  • 8Bottai G S, Pollock P J, Behling T A, et al. Damage detetion in cryogenic composites for space applications using pie- zoelectric wafer active sensors [ C ]. 49'h AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials Confer- ence and Exhibit. Schaumburg, AIAA 2008-1968.

二级参考文献6

  • 1王召巴,金永.复合材料多界面脱粘超声检测技术[J].太原师范学院学报(自然科学版),2003,2(1):45-47. 被引量:7
  • 2徐植信,洪锦如.弹性固体中波的传播[J].上海:同济大学出版社,1994.
  • 3Heller K , J Jacobs L , Qu J . Characterization of adhe- sive bond properties using Lamb waves[J]. NDTE International, 2000, 33(8). 555-563.
  • 4Peter B Nagy , Laszlo Adler. Nondestructive evaluation of adhesive joints by guided waves[J]. Journal of Ap- pried Physics, 1989, 66(10): 4568-4663.
  • 5Ningqun Guo, Peter Cawley. Lamb wave reflection for quick nondestructive evaluation of large composite lami- nates[J]. Materials Evaluations, 1994, 52(3). 404- 411.
  • 6John C, Duke Jr. A Review of the Acousto--Uhrasonic Method for Assessing the Health of Composite Material Components[C]. ASNT Spring Conference and 9th An- nual Research Symposium, Birmingham, Alabama, March 27 31. 2000.

同被引文献1

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部