Submicron Volume Roughness & Asperity Contact Friction Model for Principle Slip Surface in Flash Heating Process 被引量：1

Submicron Volume Roughness & Asperity Contact Friction Model for Principle Slip Surface in Flash Heating Process

导出

摘要 Based on focused ion beam and shear friction apparatus data, the multi-resolutions （0.2 nm-5μm） volume roughness ＆ asperity contact （VR ＆ AC） three-dimensional structure on principle slip surface interface-surface （PSS-IS） is measured on high performance computational platform; and physical plastic-creep friction model is established by using hybrid hyper-singular integral equation ＆ lattice Boltzmann ＆ lattice Green function （BE-LB-LG）. The correlation of rheological property and VR ＆ AC evolution under transient （10 μs） macro-normal stress （18-300 MPa） and slip rate （0.25-7.5 m/s） are obtained; and the PSS-IS friction in co-seismic flash heating is quantitative analyzed for the first time. Based on focused ion beam and shear friction apparatus data, the multi-resolutions （0.2 nm-5μm） volume roughness ＆ asperity contact （VR ＆ AC） three-dimensional structure on principle slip surface interface-surface （PSS-IS） is measured on high performance computational platform; and physical plastic-creep friction model is established by using hybrid hyper-singular integral equation ＆ lattice Boltzmann ＆ lattice Green function （BE-LB-LG）. The correlation of rheological property and VR ＆ AC evolution under transient （10 μs） macro-normal stress （18-300 MPa） and slip rate （0.25-7.5 m/s） are obtained; and the PSS-IS friction in co-seismic flash heating is quantitative analyzed for the first time.

作者 Bojing Zhu David A.Yuen Yaolin Shi Huihong Cheng

机构地区 Carbon Capture & Store & Rock Mechanics & Fluid Dynamic Laboratory Department of Earth Sciences and Minnesota Supercomputing Institute School of Environmental Studies Key Laboratory of Computational Geodynamics of Chinese Academy of Sciences

出处《Journal of Earth Science》 SCIE CAS CSCD 2015年第1期96-107,共12页 地球科学学刊（英文版）

关键词 VR ＆ AC BE-LB-LC submicron-scale structure measurement plastic-creep model friction model. VR ＆ AC, BE-LB-LC submicron-scale structure measurement, plastic-creep model,friction model.

分类号 P315 [天文地球—地震学]

引文网络
相关文献

参考文献2

1Ali Erden Babacan,Kenan Gelisli,Hakan Ersoy.Seismic Tomography and Surface Wave Analysis Based Methodologies on Evaluation of Geotechnical Properties of Volcanic Rocks: A Case Study[J].Journal of Earth Science,2014,25(2):348-356. 被引量：4
2Sudip Dey,Sushmita Paul,Prasamita Sarkar.Morphological and Microstructural Evidences of Paleo-Seisminc Occurrences in an Earthquake Prone Zone of Tripura, India[J].Journal of Earth Science,2014,25(2):289-298. 被引量：1

二级参考文献44

1Abdullah, A., Akhir, J. M., Abdullah, I., 2009. A Comparison of Landsat TM and SPOT Data for Lineament Mapping in Hulu Lepar Area, Pahang, Malaysia. European Journal of Scientific Research, 34(3): 406-415.
2Agarwal, P. N., 1986. A Recent Earthquake in Northeast India. In: Friedr, V. S., ed., Proceedings of 2nd International Seminar on Earthquake Prognostic, Berlin. 24-27.
3Alam, M., Alam, M. M, Curray, J. R., et al., 2003. An Over- view of the Sedimentary Geology of the Bengal Basin in Relation to the Regional Tectonic Framework and Basin- Fill History. Sedimentary Geology, 155:179-208.
4Bale, H. D., Schmidt, P. W., 1984. Small-Angle X-Ray Scat- tering Investigation of Submicroscopic Porosity with Fractal Properties. Physical Review Letters, 53:596-599.
5Bernstone, C., Dahlin, T., Bjulemar, L., et al., 1997. Identifica- tion of Poor Ground with the Aid of DC Resistivity: Re- sults From Work on the Oresund Bridge Connections. In: Proc. 3rd Meeting Environmental and Engineering Geo- physics. Environmental and Engineering Geophysical So- ciety, European Section. Aarhus, Denmark. 431-434.
6Bhattacharjee, S., 1998. Earthquakes in Northeast India Mitigation--A Possible Approach. In: Sharma, G. D., ed., Status of Landslides in Northeast India and Natural Disas- ter Management. Assam University Press. 77-84.
7Brewer, R., 1976. Fabric and Mineral Analysis of Soils. Hun- tingdon, New York.
8Cashman, S. M., Baldwin, J. N., Cashman, K. V., et al., 2007. Microstructures Developed by Coseismic and Aseismic Faulting in Near-Surface Sediments, San Andreas Fault. Geology, 35:611-614.
9Curray, J. R., Moore, D. G., 1974. Sedimentary and Tectonic Processes in Bengal Deep-Sea Fan and Geosyncline. In: Burk, C. A., Drake, C. L., eds., The Geology of Continen- tal Margins. Springer, New York. 617-628.
10Dey, S., 1999. Natural Environmental Control through Seasons on Morphology of Digha-Shankarpur Coastal Tract of Medinipur, West Bengal. h~dian Journal of Geography and Environment. 1-4:16-23.

共引文献3

1Taikun Shi,Jianzhong Zhang,Zhonglai Huang,Changkun Jin.A Layer-Stripping Method for 3D Near-Surface Velocity Model Building Using Seismic First-Arrival Times[J].Journal of Earth Science,2015,26(4):502-507. 被引量：6
2Muhammet Oğuz SÜNNETCI,Hakan ERSOY,Arzu FIRAT ERSOY.Numerical and back analysis-based methodology for support design of cut slopes at the Turkish – Georgian Border(NE Turkey)[J].Journal of Mountain Science,2021,18(6):1678-1695.
3Liang Chen,Yunfeng Ge,Xuming Zeng,Haiyan Wang,Changdong Li,Shan Dong,Yang Ye,Dongming Gu.Rapid Evaluation of Rock Mass Integrity of Engineering Slopes Using Three-Dimensional Laser Scanning[J].Journal of Earth Science,2023,34(6):1920-1925. 被引量：1

同被引文献1

1ZHU BoJing,CHENG HuiHong,QIAO YanChao,LIU Chang,SHI YaoLin,ZHANG Kai,SUN DongSheng,LIN WeiRen.Porosity and permeability evolution and evaluation in anisotropic porosity multiscale-multiphase-multicomponent structure[J].Chinese Science Bulletin,2012,57(4):320-327. 被引量：11

引证文献1

1CHENG HuiHong,ZHU BoJing,David A YUEN,SHI YaoLin.Submicron size-scale mapping of carbonate effective elastic properties from FIB-SEM images and finite element method[J].Science China Earth Sciences,2017,60(3):557-575.

1康永林,孙英,王先进.用新型摩擦装置测定薄板成形的摩擦系数[J].机械工程学报,1996,32(5):105-109. 被引量：4
2Minyi Hu,Kanggen Zhou,Chongguo Wang,Rui Xu.Cl^- induced synthesis of submicron cubic copper particles in solution[J].Journal of University of Science and Technology Beijing,2008,15(5):659-664.
3谭明祥,王允强,马春生,王釽宗.非金属夹杂物对气瓶钢质量的影响[J].钢铁,1993,28(12):24-27. 被引量：1
4X. J. Sun, J. L. Gu, B. Z. Bai, B. Dai and N. P. Chen (Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.FABRICATION OF SUBMICRON GRAINED TITANIUM ALLOY BY COMPRESSIVE DEFORMATION[J].Acta Metallurgica Sinica(English Letters),2000,13(2):638-644.
5胡连喜,王晓林,王尔德.Fabrication of high strength conductivity submicron crystalline Cu 5%Cr alloy by mechanical alloying[J].中国有色金属学会会刊：英文版,2000,10(2):209-212. 被引量：6
6特斯格林铣床有限公司：FRUQ龙门式加工中心[J].现代制造,2009(16):112-112.
7不锈钢手工钨极氩弧焊工艺特点[J].电焊机,2010(1):61-61.
8程方杰,单平,廉金瑞,胡绳荪,李宝清,曾鸿志.A mathematical model of rough surface contact characterization in spot welding[J].China Welding,2001,10(2):3-9.
9陈君,张清,李全安,付三玲,王建章.Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater[J].Transactions of Nonferrous Metals Society of China,2014,24(4):1022-1031. 被引量：14
10Chen Xiaoyang, Mao Weimin, Zhong Xueyou School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083.RHEOLOGICAL PROPERTIES OF SEMI-SOLID Al-Si ALLOY IN SOLID-LIQUID ZONE[J].中国有色金属学会会刊：英文版,1997,7(4):31-34.

Journal of Earth Science

2015年第1期

浏览历史

内容加载中请稍等...