期刊文献+

LNG接收站卸料管道保冷层厚度优化模拟 被引量:11

The optimization simulation of insulator thickness in LNG unloading pipelines
下载PDF
导出
摘要 国内LNG接收站卸料管道保冷层多为组合式保冷,保冷层普遍存在着材料浪费的问题。为此,应用Ansys Workbench(AWE)工作平台分别建立了LNG接收站典型的外径为40 in、10 in(1 in=25.4 mm)卸料管道保冷层传热及优化模型。在满足使用要求及设计标准的前提下,对保冷层组合厚度进行优化模拟,并分析了保冷材料热导率受温度变化影响时,其对管道保冷性能的影响。结果表明:优化后,40 in管道每1 000 m可节省投资156万元,10 in管道每1 000 m可节省投资25.62万元;在设计时,如不考虑保冷层热导率随温度变化而采用平均热导率计算,保冷层厚度设计偏保守。对组合保冷材料交接点处温度及各类输入参数敏感性进行分析后得出结论:优化后管道各类指标性能均满足使用要求;内层保冷材料厚度对总投资及热流密度影响最大,大气温度对交接点处温度影响最大。该优化模拟结果及基于AWE工作平台流程化设计优化方法可为LNG管道保冷设计提供参考。 Materials waste widely exists in the design of domestic insulation layers of unloading pipes in LNG terminals, which are u- sually constructed with combined insulators. The Ansys Workbench working platform (AWE) was used to establish a heat-transfer and optimization model of the unloading pipes with typical sizes of 10 and 40 inches in diameter. Optimization simulation was per- formed on the insulator thickness and the insulation properties, which are effected by varying conductivity on the premise of meeting the operating requirements and confirming to the design standards. The result shows that 1 560 thousand Yuan (RMB) was saved for every 1 km length pipe with 40 inches in diameter and 256.2 thousand Yuan was saved for that with 10 inches in diameter. The de- sign of the insulator thickness is conservative without considering insulators conductivity variation with temperatures, so the average heat conductivity should be calculated in the design. The analysis of the temperature at the joint points at the insulation layers and all kinds of parameter sensitivity also demonstrates that the performance indicators of pipeline can satisfy the operating requirements af ter optimization, and among all the researched factors, the thickness of inner-insulators has the greatest impact on the total invest- ment and heat flux, and the atmosphere temperature has the greatest influence on the junction point of insulators. Therefore, the op- timized conclusions and the optimal design method based on the AWE work platform provide references for the insulation layer de sign in LNG pipelines.
出处 《天然气工业》 EI CAS CSCD 北大核心 2015年第3期98-102,共5页 Natural Gas Industry
基金 中国石油大学(北京)青年教师专项培养基金项目"LNG储罐温度-应力场耦合效应研究"(编号:KYJJ2012-04-01)
关键词 LNG接收站 卸料管道 保冷层 优化设计 变热导率 ANSYS WORKBENCH 硬质聚氨酯泡沫 泡沫玻璃 LNG terminal Unloading pipelines Insulation layer Optimization design Variable conductivity Ansys Workbench Rigid polyurethane foam Foam glass
  • 相关文献

参考文献15

二级参考文献40

  • 1陈保东,王淳.管道保温经济厚度的研究[J].辽宁石油化工大学学报,1992,19(1):34-39. 被引量:1
  • 2刘晓燕,刘扬,郭敬红,陈丰民.埋地原油集输管道保温层厚度优化设计[J].油气储运,2005,24(2):20-22. 被引量:14
  • 3杨帆,陈保东,姜文全,田娜.液化天然气技术在调峰领域的应用[J].油气储运,2006,25(10):26-28. 被引量:14
  • 4傅家骥.工业技术经济学[M].北京:清华大学出版社,1992..
  • 5天津大学物理化学教研室编.物理化学[M].北京:高等教育出版社,1992.162-163.
  • 6谷培韬,曹世雍,李素文.SH3010-2000石油化工设备和管道隔热技术规范[S].北京:中国石化出版社,2000:13-14.
  • 7张德姜,王怀义,刘绍叶,工艺管道安装设计手册[M].北京:中国石化出版社,1998:875.
  • 8SH3010--2000,石油化工设备和管道隔热设计规范[S].
  • 9谷培韬,曹世雍,李索文.石油化工设备和管道隔热技术规范SH 3010-2000[S].北京:国家石油和化学工业局,2000.
  • 10李庆杰.LNG管道输送技术[D].抚顺:辽宁石油化工大学石油天然气工程学院,2010.

共引文献64

同被引文献104

引证文献11

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部